Tag Archives: china fan motor

China factory High Performance Electric Brushless Motor DC Gear Motor Fan Cooling 48V2kw Brushless DC Motor BLDC Motor Tricycle Battery Car Professional Motor with Good quality

Product Description

LK100Product features
No carbon brush and spark
l Large speed adjustment range
l High efficiency and large torque
l Low starting current and noise
l Small size and light weight
l High reliability double hall outgoing mode

 

Product parameters
model 71 80 90 100 112 132 160  
voltage range
(V/DC)
12–540 12–540 12–540 24–540 24–540 48–540 110–540  
Power range
(kW)
0.3–0.8 0.8–1.2 1.0–1.8 1.8–3.0 3.0–10.0 5.5–15.0 15.0–30.0  
Speed range
(RPM)
750–3000  
maximum efficiency 92% (brushless DC motor), 95% (permanent magnet synchronous motor)  
Installation method Foot (B5), vertical (B14), foot/vertical (B34), double shaft (D2)  
turn around Face the outlet end, turn counterclockwise to turn CHINAMFG (the direction can be changed)  
Motor overspeed The motor runs continuously with a load of 50% of the rated current at 1.5 times the rated voltage  
overload capacity 1.5 times the rated torque for 3 minutes, the motor performance does not change, the controller cuts off the output and displays the overload protection  
Operating temperature -25ºC–60ºC  
Use humidity 20%–90%RH  
Keep warm and humid
Spend
-30ºC–80ºC,10%–95%RH  
Protection class IP54 (default), other protection levels can be achieved according to customer requirements  
Features 1. Small size and light weight;
2. High efficiency, large torque, energy saving and environmental protection;
3. No carbon brush, no spark;
4. Small starting current and low noise; (permanent magnet synchronous motor has lower working noise than brushless DC motor)
5. Double Hall outlet with anti-static protection, high reliability;
6. The applicable voltage range is wide and the limitation is small.
 
Customizable electricity
machine
Permanent magnet synchronous motor, self-starting permanent magnet synchronous motor, integrated motor, etc.  

 
 

 

 

 

Matters needing attention  
l All connecting screws shall be fastened to avoid irreversible damage to the product due to poor contact
l Connect the motor phase line in strict accordance with the terminal definition, otherwise the motor will not rotate normally or cannot rotate
l The power supply voltage shall not exceed 1.2 times of the rated voltage
l It is prohibited to use it continuously under overload condition, which may cause irreversible damage to the product

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Adjust Speed
Function: Driving

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

gear motor

Are there innovations or emerging technologies in the field of gear motor design?

Yes, there are several innovations and emerging technologies in the field of gear motor design. These advancements aim to improve the performance, efficiency, compactness, and reliability of gear motors. Here are some notable innovations and emerging technologies in gear motor design:

1. Miniaturization and Compact Design:

Advancements in manufacturing techniques and materials have enabled the miniaturization of gear motors without compromising their performance. Gear motors with compact designs are highly sought after in applications where space is limited, such as robotics, medical devices, and consumer electronics. Innovative approaches like micro-gear motors and integrated motor-gear units are being developed to achieve smaller form factors while maintaining high torque and efficiency.

2. High-Efficiency Gearing:

New gear designs focus on improving efficiency by reducing friction and mechanical losses. Advanced gear manufacturing techniques, such as precision machining and 3D printing, allow for the creation of intricate gear tooth profiles that optimize power transmission and minimize losses. Additionally, the use of high-performance materials, coatings, and lubricants helps reduce friction and wear, improving overall gear motor efficiency.

3. Magnetic Gearing:

Magnetic gearing is an emerging technology that replaces traditional mechanical gears with magnetic fields to transmit torque. It utilizes the interaction of permanent magnets to transfer power, eliminating the need for physical gear meshing. Magnetic gearing offers advantages such as high efficiency, low noise, compactness, and maintenance-free operation. While still being developed and refined, magnetic gearing holds promise for various applications, including gear motors.

4. Integrated Electronics and Controls:

Gear motor designs are incorporating integrated electronics and controls to enhance performance and functionality. Integrated motor drives and controllers simplify system integration, reduce wiring complexity, and allow for advanced control features. These integrated solutions offer precise speed and torque control, intelligent feedback mechanisms, and connectivity options for seamless integration into automation systems and IoT (Internet of Things) platforms.

5. Smart and Condition Monitoring Capabilities:

New gear motor designs incorporate smart features and condition monitoring capabilities to enable predictive maintenance and optimize performance. Integrated sensors and monitoring systems can detect abnormal operating conditions, track performance parameters, and provide real-time feedback for proactive maintenance and troubleshooting. This helps prevent unexpected failures, extend the lifespan of gear motors, and improve overall system reliability.

6. Energy-Efficient Motor Technologies:

Gear motor design is influenced by advancements in energy-efficient motor technologies. Brushless DC (BLDC) motors and synchronous reluctance motors (SynRM) are gaining popularity due to their higher efficiency, better power density, and improved controllability compared to traditional brushed DC and induction motors. These motor technologies, when combined with optimized gear designs, contribute to overall system energy savings and performance improvements.

These are just a few examples of the innovations and emerging technologies in gear motor design. The field is continuously evolving, driven by the need for more efficient, compact, and reliable motion control solutions in various industries. Gear motor manufacturers and researchers are actively exploring new materials, manufacturing techniques, control strategies, and system integration approaches to meet the evolving demands of modern applications.

gear motor

How do gear motors compare to other types of motors in terms of power and efficiency?

Gear motors can be compared to other types of motors in terms of power output and efficiency. The choice of motor type depends on the specific application requirements, including the desired power level, efficiency, speed range, torque characteristics, and control capabilities. Here’s a detailed explanation of how gear motors compare to other types of motors in terms of power and efficiency:

1. Gear Motors:

Gear motors combine a motor with a gear mechanism to deliver increased torque output and improved control. The gear reduction enables gear motors to provide higher torque while reducing the output speed. This makes gear motors suitable for applications that require high torque, precise positioning, and controlled movements. However, the gear reduction process introduces mechanical losses, which can slightly reduce the overall efficiency of the system compared to direct-drive motors. The efficiency of gear motors can vary depending on factors such as gear quality, lubrication, and maintenance.

2. Direct-Drive Motors:

Direct-drive motors, also known as gearless or integrated motors, do not use a gear mechanism. They provide a direct connection between the motor and the load, eliminating the need for gear reduction. Direct-drive motors offer advantages such as high efficiency, low maintenance, and compact design. Since there are no gears involved, direct-drive motors experience fewer mechanical losses and can achieve higher overall efficiency compared to gear motors. However, direct-drive motors may have limitations in terms of torque output and speed range, and they may require more complex control systems to achieve precise positioning.

3. Stepper Motors:

Stepper motors are a type of gear motor that excels in precise positioning applications. They operate by converting electrical pulses into incremental steps of movement. Stepper motors offer excellent positional accuracy and control. They are capable of precise positioning and can hold a position without power. Stepper motors have relatively high torque at low speeds, making them suitable for applications that require precise control and positioning, such as robotics, 3D printers, and CNC machines. However, stepper motors may have lower overall efficiency compared to direct-drive motors due to the additional power required to overcome the detents between steps.

4. Servo Motors:

Servo motors are another type of gear motor known for their high torque, high speed, and excellent positional accuracy. Servo motors combine a motor, a feedback device (such as an encoder), and a closed-loop control system. They offer precise control over position, speed, and torque. Servo motors are widely used in applications that require accurate and responsive positioning, such as industrial automation, robotics, and camera pan-tilt systems. Servo motors can achieve high efficiency when properly optimized and controlled but may have slightly lower efficiency compared to direct-drive motors due to the additional complexity of the control system.

5. Efficiency Considerations:

When comparing power and efficiency among different motor types, it’s important to consider the specific requirements and operating conditions of the application. Factors such as load characteristics, speed range, duty cycle, and control requirements influence the overall efficiency of the motor system. While direct-drive motors generally offer higher efficiency due to the absence of mechanical losses from gears, gear motors can deliver higher torque output and enhanced control capabilities. The efficiency of gear motors can be optimized through proper gear selection, lubrication, and maintenance practices.

In summary, gear motors offer increased torque and improved control compared to direct-drive motors. However, gear reduction introduces mechanical losses that can slightly impact the overall efficiency of the system. Direct-drive motors, on the other hand, provide high efficiency and compact design but may have limitations in terms of torque and speed range. Stepper motors and servo motors, both types of gear motors, excel in precise positioning applications but may have slightly lower efficiency compared to direct-drive motors. The selection of the most suitable motor type depends on the specific requirements of the application, balancing power, efficiency, speed range, and control capabilities.

gear motor

Can you explain the advantages of using gear motors in various mechanical systems?

Gear motors offer several advantages when utilized in various mechanical systems. Their unique characteristics make them well-suited for applications that require controlled power transmission, precise speed control, and torque amplification. Here’s a detailed explanation of the advantages of using gear motors:

1. Torque Amplification:

One of the key advantages of gear motors is their ability to amplify torque. By using different gear ratios, gear motors can increase or decrease the output torque from the motor. This torque amplification is crucial in applications that require high torque output, such as lifting heavy loads or operating machinery with high resistance. Gear motors allow for efficient power transmission, enabling the system to handle demanding tasks effectively.

2. Speed Control:

Gear motors provide precise speed control, allowing for accurate and controlled movement in mechanical systems. By selecting the appropriate gear ratio, the rotational speed of the output shaft can be adjusted to match the requirements of the application. This speed control capability ensures that the mechanical system operates at the desired speed, whether it needs to be fast or slow. Gear motors are commonly used in applications such as conveyors, robotics, and automated machinery, where precise speed control is essential.

3. Directional Control:

Another advantage of gear motors is their ability to control the rotational direction of the output shaft. By using different types of gears, such as spur gears, bevel gears, or worm gears, the direction of rotation can be easily changed. This directional control is beneficial in applications that require bidirectional movement, such as in actuators, robotic arms, and conveyors. Gear motors offer reliable and efficient directional control, contributing to the versatility and functionality of mechanical systems.

4. Efficiency and Power Transmission:

Gear motors are known for their high efficiency in power transmission. The gear system helps distribute the load across multiple gears, reducing the strain on individual components and minimizing power losses. This efficient power transmission ensures that the mechanical system operates with optimal energy utilization and minimizes wasted power. Gear motors are designed to provide reliable and consistent power transmission, resulting in improved overall system efficiency.

5. Compact and Space-Saving Design:

Gear motors are compact in size and offer a space-saving solution for mechanical systems. By integrating the motor and gear system into a single unit, gear motors eliminate the need for additional components and reduce the overall footprint of the system. This compact design is especially beneficial in applications with limited space constraints, allowing for more efficient use of available space while still delivering the necessary power and functionality.

6. Durability and Reliability:

Gear motors are designed to be robust and durable, capable of withstanding demanding operating conditions. The gear system helps distribute the load, reducing the stress on individual gears and increasing overall durability. Additionally, gear motors are often constructed with high-quality materials and undergo rigorous testing to ensure reliability and longevity. This makes gear motors well-suited for continuous operation in industrial and commercial applications, where reliability is crucial.

By leveraging the advantages of torque amplification, speed control, directional control, efficiency, compact design, durability, and reliability, gear motors provide a reliable and efficient solution for various mechanical systems. They are widely used in industries such as robotics, automation, manufacturing, automotive, and many others, where precise and controlled mechanical power transmission is essential.

China factory High Performance Electric Brushless Motor DC Gear Motor Fan Cooling 48V2kw Brushless DC Motor BLDC Motor Tricycle Battery Car Professional Motor   with Good quality China factory High Performance Electric Brushless Motor DC Gear Motor Fan Cooling 48V2kw Brushless DC Motor BLDC Motor Tricycle Battery Car Professional Motor   with Good quality
editor by CX 2024-02-18

China Hot selling High Torque Permanent Magnet Electric 24V 3000rpm 50W Small Volume Servo BLDC Brushless DC Gear Motor with Gearbox for Industrial Fan vacuum pump brakes

Product Description

57BLY DC Brushless Motor

  Introducing the High Torque Permanent Magnet Electric 24V 3000RPM 50W Small Volume Servo BLDC Brushless DC Gear Motor with Gearbox for Industrial Fan. This universal motor operates at a constant speed and is excited by a brushless DC motor. Perfect for industrial, household appliances, cars, and power tools.

Product Description

 

Projects Specifications
Winding Type Star
Hall Effect Angle 120° electrical angle
Shaft Axial Play 0.571mm
Ambient Temperature -20~ + 50°C
Ambient Humidity <80%
Max. Radial Force 75N@20mm from the flange
Max. Axial Force 20N
Insulation Class Class B
Dielectric Strength one minute@500VAC
Insulation Resistance 100MΩMin.@500VDC

Product Parameters

 

Model Rated Voltage Rated Torque Rated Speed Rated Current Rated Power Peak Torque Torque Constant Body Length Weight
  VDC N.M RPM A W N.M N.M/A MM KG
57BLY55-230 24 0.16 3000 2.8 50 0.48 0.057 55 0.46
57BLY55-460 48 0.16 6000 2.8 100 0.48 0.057 55 0.46
57BLY75-230 24 0.32 3000 5.6 100 0.96 0.057 75 0.75
57BLY75-460 48 0.32 6000 5.6 200 0.96 0.057 75 0.75
57BLY95-230 24 0.48 3000 8.4 150 1.44 0.057 95 1
57BLY95-460 48 0.48 6000 8.4 300 1.44 0.057 95 1
57BLY115-230 24 0.64 3000 11.2 200 1.92 0.057 115 1.2
57BLY115-460 48 0.64 6000 11.2 400 1.92 0.057 115 1.2

Note:Brake, reducer, encoder, handwheel and other devices can be installed.
         Please feel free to contact us for more details.

Detailed Photos

 

 

Application Area

Product Recommendation

Stepper motor Brushless motor Synchronous motor

                

Company Profile

HangZhou Sino-pan Electric Co., Ltd. is an export-oriented enterprise. Located in Xihu (West Lake) Dis. District, HangZhou City, ZheJiang Province, China. After years of operation, the scale of our enterprise has continued to expand. Gradually grow into a group company. At present, our company mainly produces automotive bulbs (such as halogen bulbs and automotive LED bulbs/as well as household LEDs and commercial LEDs), motors (brushless motors/stepping motors/synchronous motors/asynchronous motors). At the same time, we are also appointed by many clients as purchasing and quality inspection agents in China.

We provide you with high-quality, fast, efficient and inexpensive automotive lighting, motors and auxiliary electrical services. Zhongpan welcomes your patronage with a sHangZhou, and we will provide you with a variety of satisfactory products and a full range of consulting services. We firmly believe that the cooperation with us will be infinitely better! Strive to create a stronger tomorrow for our customers!

 

Packaging & Shipping

 

FAQ

Q1. Can I provide sample orders for your products?
A: Of course, you can check our quality before ordering. If you have any requirements, please contact us.

Q2. What is your delivery time?
A: It depends on the order quantity. Usually, it takes about 3-7 days after receiving the small deposit. Bulk ordering takes 10-20 days.

Q3. What kind of customers and what kind of companies do you work with?
A: We have 20 years of export experience and serve more than 100 customers, such as retailers, wholesalers, and online store owners.

Q4. Is it possible to put our logo on your product or product packaging?
A: Of course, we have a factory, welcome to customize your brand, LOGO, color, product manual, packaging, etc. 

Q5: Can you OEM for me?
A: We accept all OEM orders, just contact us and give me your design. We will provide you with a reasonable price and make samples for you as soon as possible. 

Q6: What are your payment terms?
A: According to T/T, LC AT SIGHT, 30% deposit in advance, and the balance 70% before shipment.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Constant Speed
Excitation Mode: Excited
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

servo motor

What role does the controller play in the overall performance of a servo motor?

The controller plays a crucial role in the overall performance of a servo motor system. It is responsible for monitoring and regulating the motor’s operation to achieve the desired motion and maintain system stability. Let’s explore in detail the role of the controller in the performance of a servo motor:

1. Motion Control:

The controller is responsible for generating precise control signals that dictate the motor’s speed, torque, and position. It receives input commands from the user or higher-level control system and translates them into appropriate control signals for the servo motor. By accurately controlling the motor’s motion, the controller enables precise positioning, smooth acceleration and deceleration, and the ability to follow complex trajectories. The controller’s effectiveness in generating accurate and responsive control signals directly impacts the motor’s motion control capabilities.

2. Feedback Control:

The controller utilizes feedback from position sensors, such as encoders, to monitor the motor’s actual position, speed, and other parameters. It compares the desired motion profile with the actual motor behavior and continuously adjusts the control signals to minimize any deviations or errors. This closed-loop feedback control mechanism allows the controller to compensate for disturbances, variations in load conditions, and other factors that may affect the motor’s performance. By continuously monitoring and adjusting the control signals based on feedback, the controller helps maintain accurate and stable motor operation.

3. PID Control:

Many servo motor controllers employ Proportional-Integral-Derivative (PID) control algorithms to regulate the motor’s behavior. PID control calculates control signals based on the error between the desired setpoint and the actual motor response. The proportional term responds to the present error, the integral term accounts for accumulated past errors, and the derivative term considers the rate of change of the error. By tuning the PID parameters, the controller can achieve optimal performance in terms of response time, stability, and steady-state accuracy. Properly configured and tuned PID control greatly influences the servo motor’s ability to follow commands accurately and efficiently.

4. Trajectory Planning:

In applications requiring complex motion profiles or trajectories, the controller plays a vital role in trajectory planning. It determines the optimal path and speed profile for the motor to follow, taking into account constraints such as acceleration limits, jerk limits, and mechanical limitations. The controller generates the required control signals to achieve the desired trajectory, ensuring smooth and precise motion. Effective trajectory planning by the controller enhances the motor’s performance in applications that involve intricate or high-speed movements.

5. System Monitoring and Protection:

The controller monitors various parameters of the servo motor system, including temperature, current, voltage, and other diagnostic information. It incorporates protective measures to prevent damage or excessive stress on the motor. The controller can implement safety features such as overcurrent protection, over-temperature protection, and fault detection mechanisms. By actively monitoring and safeguarding the motor and the system, the controller helps prevent failures, prolongs the motor’s lifespan, and ensures safe and reliable operation.

6. Communication and Integration:

The controller facilitates communication and integration with other components or systems within the overall automation setup. It may support various communication protocols, such as Ethernet, CAN bus, or fieldbus protocols, enabling seamless integration with higher-level control systems, human-machine interfaces (HMIs), or other peripheral devices. The controller’s ability to efficiently exchange data and commands with other system components allows for coordinated and synchronized operation, enhancing the overall performance and functionality of the servo motor system.

In summary, the controller plays a vital role in the overall performance of a servo motor system. It enables precise motion control, utilizes feedback for closed-loop control, implements PID control algorithms, plans complex trajectories, monitors system parameters, and facilitates communication and integration. The controller’s capabilities and effectiveness directly impact the motor’s performance in terms of accuracy, responsiveness, stability, and overall system efficiency.

servo motor

How is the size of a servo motor determined based on application requirements?

The size of a servo motor is an important consideration when selecting a motor for a specific application. The size of the motor is determined based on various factors related to the application requirements. Let’s explore how the size of a servo motor is determined:

1. Torque Requirements:

One of the primary factors in determining the size of a servo motor is the torque requirements of the application. The motor should be able to generate sufficient torque to handle the load and overcome any resistance or friction in the system. The required torque depends on factors such as the weight of the load, the distance from the motor’s axis of rotation, and any additional forces acting on the system. By analyzing the torque requirements, one can select a servo motor with an appropriate size and torque rating to meet the application’s needs.

2. Speed and Acceleration Requirements:

The desired speed and acceleration capabilities of the application also influence the size of the servo motor. Different applications have varying speed and acceleration requirements, and the motor needs to be capable of achieving the desired performance. Higher speeds and accelerations may require larger motors with more powerful components to handle the increased forces and stresses. By considering the required speed and acceleration, one can determine the size of the motor that can meet these demands.

3. Inertia and Load Inertia Ratio:

The inertia of the load and the inertia ratio between the load and the servo motor are important considerations in sizing the motor. Inertia refers to the resistance of an object to changes in its rotational motion. If the load has a high inertia, it requires a servo motor with sufficient size and torque to accelerate and decelerate the load effectively. The inertia ratio, which is the ratio of the load inertia to the motor inertia, affects the motor’s ability to control the load’s motion accurately. A proper balance between the load and motor inertia is necessary to achieve optimal performance and stability in the system.

4. Duty Cycle and Continuous Operation:

The duty cycle and continuous operation requirements of the application also impact the motor size selection. Duty cycle refers to the ratio of the motor’s operating time to the total cycle time. Applications with high-duty cycles or continuous operation may require larger motors that can handle sustained operation without overheating or performance degradation. It is important to consider the motor’s continuous torque rating and thermal characteristics to ensure it can operate reliably under the given duty cycle requirements.

5. Physical Space Constraints:

The physical space available for installing the servo motor is another factor to consider. The motor’s dimensions should fit within the available space, considering factors such as motor length, diameter, and any mounting requirements. It is essential to ensure that the chosen motor can be easily integrated into the system without interfering with other components or causing space constraints.

6. Weight Limitations:

The weight limitations of the application may influence the motor size selection. If there are weight restrictions, such as in mobile or lightweight applications, it is necessary to choose a servo motor that is compact and lightweight while still providing the required performance. Lighter servo motors can help optimize the overall weight and balance of the system.

7. Cost Considerations:

Cost is also a factor to consider when determining the size of a servo motor. Larger motors with higher torque and performance capabilities tend to be more expensive. It is important to strike a balance between the required performance and the cost constraints of the application. Analyzing the cost-effectiveness and overall value of the motor in relation to the application requirements is essential.

By considering these factors, one can determine the appropriate size of a servo motor that can meet the specific application requirements. It is advisable to consult with manufacturers or experts in the field to ensure the chosen motor size aligns with the application needs and provides optimal performance and reliability.

servo motor

Can you explain the difference between a servo motor and a regular electric motor?

A servo motor and a regular electric motor are both types of electric motors, but they have distinct differences in terms of design, control, and functionality.

A regular electric motor, also known as an induction motor or a DC motor, is designed to convert electrical energy into mechanical energy. It consists of a rotor, which rotates, and a stator, which surrounds the rotor and generates a rotating magnetic field. The rotor is connected to an output shaft, and when current flows through the motor’s windings, it creates a magnetic field that interacts with the stator’s magnetic field, resulting in rotational motion.

On the other hand, a servo motor is a more specialized type of electric motor that incorporates additional components for precise control of position, speed, and acceleration. It consists of a regular electric motor, a sensor or encoder, and a feedback control system. The sensor or encoder provides feedback on the motor’s current position, and this information is used by the control system to adjust the motor’s behavior.

The key difference between a servo motor and a regular electric motor lies in their control mechanisms. A regular electric motor typically operates at a fixed speed based on the voltage and frequency of the power supply. In contrast, a servo motor can be controlled to rotate to a specific angle or position and maintain that position accurately. The control system continuously monitors the motor’s actual position through the feedback sensor and adjusts the motor’s operation to achieve the desired position or follow a specific trajectory.

Another distinction is the torque output of the motors. Regular electric motors generally provide high torque at low speeds and lower torque at higher speeds. In contrast, servo motors are designed to deliver high torque at both low and high speeds, which makes them suitable for applications that require precise and dynamic motion control.

Furthermore, servo motors often have a more compact and lightweight design compared to regular electric motors. They are commonly used in applications where precise positioning, speed control, and responsiveness are critical, such as robotics, CNC machines, automation systems, and remote-controlled vehicles.

In summary, while both servo motors and regular electric motors are used to convert electrical energy into mechanical energy, servo motors offer enhanced control capabilities, precise positioning, and high torque at various speeds, making them well-suited for applications that require accurate and dynamic motion control.

China Hot selling High Torque Permanent Magnet Electric 24V 3000rpm 50W Small Volume Servo BLDC Brushless DC Gear Motor with Gearbox for Industrial Fan   vacuum pump brakesChina Hot selling High Torque Permanent Magnet Electric 24V 3000rpm 50W Small Volume Servo BLDC Brushless DC Gear Motor with Gearbox for Industrial Fan   vacuum pump brakes
editor by CX 2024-02-17

China best Three Phase Asynchronous AC Induction Electric Gear Reducer Fan Blower Vacuum Air Compressor Water Pump Universal Industry Machine Motor vacuum pump ac system

Product Description

Product Description

Introduction:

     Y2 series three-phase asynchronous motor is Y series motor the upgrading of product, is the totally enclosed, fan-cooled induction motor for general purpose .
 It was the newest product in the 90S’ ,its overall level has reached the same products abroad at the beginning of 90S’level. The product apply to economic lake-off fields, such as machine tools, water pump, fan, compressor, also can be applied to transportation, stirring, printing, agricultural machinery, food and other kinds of excluding inflammable, explosive or corrosive gas.
     Y2 series three phase asynchronous motor installation size and power grade in conformity with relevant standards of IEC and Germany DIN42673 standard line and Y series motor, its shell protection grade for IP54, cooling method for IC41l, operate continuously (S1). Using F insulation class and grade B assessment according to temperature (except for 315 L2-2, 4355 all specifications F grade the assessment, and ask the assessment load noise index.
        Y2 series three-phase asynchronous motor the rated voltage is 380 V. rated frequency is 50 Hz. 3 KW the following connection is Y , other power are delta connection . Motor running the place at no more than 1000 m; Environment air temperature changes with seasons, but no more than 40 °C; Minimum environment air temperature is-15 °C; The wet month average high relative humidity is 90%; At the same time, this month is not higher than the lowest average temperature 25 °C.
 

Motor Features:

1. Frame size:H56-355;
2. Power:0.12-315Kw;
3. Voltage: 380V;

4. Rated Frequency: 50 Hz / 60 Hz;

5. Poles: 2 / 4 / 6 / 8 / 10

6. Speed: 590 -2980 r/min

7. Ambient Temperature: -15°C-40°C 

8. Model of CONEECTION: Y-Connection for 3 KW motor or less while Delta-Connection for 4 KW motor or more;

9. Mounting:  B3; B5; B35; B14; B34; 

10. Current: 1.5-465 A (AC);

11. Duty: continuous (S1);

12. Insulation Class:  B;

13. Protection Class:  IP44,IP54,IP55;

14. Frame material: aluminum body(56-132 frame), cast iron(71-355 frame)

15. Terminal box : Top or Side 

16. Cooling Method: IC411 Standards;

17. Altitude: No more than 1,000 meters above sea level;

18. Packing: 63-112 frame be packaged by carton&pallets

                   132-355 frame be packaged by plywood case;

19. Certifications: CE, CCC, ISO9001: 2008

 

Factory Advantages

 

1 . 15 years history

 

2. Competitive Price

 

3. Guaranteed Quality 

 

4. Fast delivery time, Normal models about 15-20days , another not normal models need about 30days

 

5. 100% testing after each process and final testing before packing ,all raw material is good quality .100% cooper wire, Cold-rolled silicon steel sheet,good quaility shafts ,bearings,stators ,fan,fan covers.and so on.

 

6. High efficiency

 

7. Low noise 

 

8. Long life

 

9. Power saving

 

10. Slight vibration

 

11. It is newly designed in conformity with the relevant rules of IEC standards, Strictly and Perfect Management is guaranteed for Production ;

 

12. Professional Service

 

13. Warranty: 12 months from date of delivery

 

14. Main Market: South America, Middle East, Southest Asia, Europe,Africa and so on  

 

15. We have Certification for CE, CCC, ISO9001,High quality and competitive price !

 

Installation Instructions

   Y2 Three-phase Asynchronous Electric Motor
1). Power:  0.12KW-315KW;
2). Frame:  H56 to 355;
3). Shell:   cast iron body , aluminum body ;
4). Pole:  2/4/6/8 poles;
5). Mounting arrangement:  B3/B5/B14/B35/B34 or other;
6). Voltage:   220V, 380V, 400V, 415V, 440V or on request (50Hz or 60Hz);
7). Protection class:  IP54 / IP55 /IP65;
8). Duty/Rating:  S1 (Continuous);
9). Cooling method:   IC411 (SELF-FAN cooling);
10). Insulation class:   F;
11).Standard:  (IEC) EN60034-1 & EN1065714-1.

 

Technical Data

TYPE OUTPUT FULL LOAD Ist/TN Tst/TN Tmax/TN
HP KW Speed
(RPM)
Current
(A)
Efficiency
η(%)
Power Factor
(cosΦ)
Synchronous Speed 3000 rpm
Y2-631-2 0.18 0.25 2720 0.53 65 0.80 5.5 2.2 2.2
Y2-632-2 0.25 0.34 2720 0.69 68 0.81 5.5 2.2 2.2
Y2-711-2 0.37 0.5 2740 0.99 70 0.81 6.1 2.2 2.2
Y2-712-2 0.55 0.75 2740 1.4 73 0.82 6.1 2.2 2.3
Y2-801-2 0.75 1 2835 1.83 77.4 0.83 6.1 2.2 2.3
Y2-802-2 1.1 1.5 2835 2.58 79.6 0.84 7 2.2 .2.3
Y2-90S-2 1.5 2 2845 3.43 81.3 0.84 7 2.2 2.3
Y2-90L-2 2.2 3 2845 4.85 83.2 0.85 7 2.2 2.3
Y2-100L-2 3 4 2875 6.31 84.6 0.87 7.5 2.2 2.3
Y2-112M-2 4 5.5 2895 8.1 85.8 0.88 7.5 2.2 2.3
Y2-132S1-2 5.5 7.5 2905 11 87 0.88 7.5 2.2 2.3
Y2-132S2-2 7.5 10 2905 14.9 88.1 0.88 7.5 2.2 2.3
Y2-160M1-2 11 15 2935 21.3 89.4 0.89 7.5 2.2 2.3
Y2-160M2-2 15 20 2935 28.8 90.3 0.89 7.5 2.2 2.3
Y2-160L-2 18.5 25 2935 34.7 90.9 0.90 7.5 2.2 2.3
Y2-180M-2 22 30 2945 41 91.3 0.90 7.5 2 2.3
Y2-200L1-2 30 40 2955 55.5 92 0.90 7.5 2 2.3
Y2-200L2-2 37 50 2955 67.9 92.5 0.90 7.5 2 2.3
Y2-225M-2 45 60 2975 82.3 92.9 0.92 7.5 2 2.3
Y2-250M-2 55 75 2975 101 93.2 0.90 7.5 2 2.3
Y2-280S-2 75 100 2975 134 93.8 0.90 7.5 2 2.3
Y2-315S-2 110 150 2980 195 94.3 0.91 7.1 1.8 2.2
Y2-315M-2 132 180 2980 233 94.6 0.91 7.1 1.8 2.2
Y2-315L1-2 160 200 2980 279 94.8 0.92 7.1 1.8 2.2
Y2-315L2-2 200 270 2980 348 95 0.92 7.1 1.8 2.2
Y2-355M-2 250 340 2980 433 95 0.92 7.1 1.6 2.2
Y2-355L-2 315 430 2980 544 95 0.92 5.8 1.6 2.2
Y2-400M1-2 355 475 2975 618 95.9 0.91 5.8 1.23 2.53
Y2-400M2-2 400 535 2982 689 96.0 0.92 5.74 1.31 2.43
Y2-400M3-2 450 600 2982 775 96.1 0.92 7.27 1.83 2.98
Y2-400L1-2 500 670 2982 853 96.3 0.92 6.14 1.2 2.9
Y2-400L2-2 560 750 2982 952 96.3 0.92 5.46 0.98 2.57
Synchronous Speed 1500 rpm
Y2-631-4 0.12 0.17 1310 0.44 57 0.72 4.4 2.1 2.2
Y2-632-4 0.18 0.25 1310 1.62 60 0.73 4.4 2.1 2.2
Y2-711-4 0.25 0.34 1330 0.79 65 0.75 5.2 2.1 2.2
Y2-712-4 0.37 0.5 1330 1.12 67 0.74 5.2 2.1 2.2
Y2-801-4 0.55 0.75 1395 1.57 71 0.75 5.2 2.4 2.3
Y2-802-4 0.75 1 1395 2.03 79.6 0.76 6 2.3 2.3
Y2-90S-4 1.1 1.5 1405 2.89 81.4 0.77 6 2.3 2.3
Y2-90L-4 1.5 2 1405 3.7 82.8 0.79 6 2.3 2.3
Y2-100L1-4 2.2 3 1435 5.16 84.3 0.81 7 2.3 2.3
Y2-100L2-4 3 4 1435 6.78 85.5 0.82 7 2.3 2.3
Y2-112M-4 4 5.5 1445 8.8 86.6 0.82 7 2.3 2.3
Y2-132S-4 5.5 7.5 1445 11.7 87.7 0.83 7 2.3 2.3
Y2-132M-4 7.5 10 1445 15.6 88.7 0.84 7 2.3 2.3
Y2-160M-4 11 15 1460 22.3 89.8 0.84 7 2.2 2.3
Y2-160L-4 15 20 1460 30.1 90.6 0.85 7.5 2.2 2.3
Y2-180M-4 18.5 25 1470 36.5 91.2 0.86 7.5 2.2 2.3
Y2-180L-4 22 30 1470 43.2 91.6 0.86 7.5 2.2 2.3
Y2-200L-4 30 40 1470 57.6 92.3 0.86 7.2 2.2 2.3
Y2-225S-4 37 50 1485 69.9 92.7 0.87 7.2 2.2 2.3
Y2-225M-4 45 60 1485 84.7 93.1 0.87 7.2 2.2 2.3
Y2-250M-4 55 75 1485 103 93.5 0.87 7.2 2.2 2.3
Y2-280S-4 75 100 1485 140 94 0.87 7.2 2.2 2.3
Y2-280M-4 90 125 1490 167 94.2 0.87 7.2 2.2 2.3
Y2-315S-4 110 150 1490 201 94.5 0.88 6.9 2.1 2.2
Y2-315M-4 132 180 1490 240 94.7 0.88 6.9 2.1 2.2
Y2-315L1-4 160 200 1490 287 94.9 0.89 6.9 2.1 2.2
Y2-315L2-4 200 270 1490 359 94.1 0.89 6.9 2.1 2.2
Y2-355M-4 250 340 1485 443 95.1 0.90 6.9 2.1 2.2
Y2-355L-4 315 430 1485 556 95.1 0.90 6.9 2.1 2.2
Y2-400M1-4 355 475 1490 641 95.5 0.88 6.5 2.6 1.93
Y2-400M2-4 400 535 1490 723 95.5 0.88 6.5 2.75 1.8
Y2-400M3-4 450 600 1490 804 95.5 0.89 6.5 2.81 2.03
Y2-400L1-4 500 670 1490 893 95.6 0.89 6.61 2.52 1.83
Y2-400L2-4 560 750 1490 971 96.0 0.89 6.6 2.67 2.02
Synchronous Speed 1000 rpm
Y2-711-6 0.18 0.25 850 0.74 56 0.66 4 1.9 2
Y2-712-6 0.25 0.34 850 0.95 59 0.68 4 1.9 2
Y2-801-6 0.37 0.5 890 1.3 62 0.70 4.7 1.9 2
Y2-802-6 0.55 0.75 890 1.79 65 0.72 4.7 1.9 2.1
Y2-90S-6 0.7 1 915 2.29 75.9 0.72 5.5 2 2.1
Y2-90L-6 1.1 1.5 915 3.18 78.1 0.73 5.5 2 2.1
Y2-100L-6 1.5 2 945 3.94 79.8 0.75 5.5 2 2.1
Y2-112M-6 2.2 3 945 5.6 81.8 0.76 6.5 2 2.1
Y2-132S-6 3 4 965 7.4 83.3 0.76 6.5 2.1 2.1
Y2-132M1-6 4 5.5 965 9.8 84.6 0.76 6.5 2.1 2.1
Y2-132M2-6 5.5 7.5 965 12.9 86 0.77 6.5 2.1 2.1
Y2-160M-6 7.5 10 975 17 87.2 0.78 6.5 2 2.1
Y2-160L-6 11 15 975 24.2 88.7 0.81 7 2 2.1
Y2-180L-6 15 20 975 31.6 89.7 0.81 7 2 2.1
Y2-200L1-6 18.5 25 975 38.6 90.4 0.83 7 2.1 2.1
Y2-200L2-6 22 30 975 44.7 90.9 0.84 7 2.1 2.1
Y2-225M-6 30 40 980 59.3 91.7 0.86 7 2 2.1
Y2-250M-6 37 50 980 71 92.2 0.86 7 2.1 2.1
Y2-280S-6 45 60 980 86 92.7 0.86 7 2.1 2
Y2-280M-6 55 75 980 105 93.1 0.86 7 2.1 2
Y2-315S-6 75 100 980 141 93.7 0.86 7 2 2
Y2-315M-6 90 125 980 169 94 0.86 7 2 2
Y2-315L1-6 110 150 980 206 94.3 0.86 6.7 2 2
Y2-315L2-6 132 180 980 244 94.6 0.87 6.7 2 2
Y2-355M1-6 160 200 985 292 94.8 0.88 6.7 1.9 2
Y2-355M2-6 200 270 985 365 95 0.88 6.7 1.9 2
Y2-355L-6 250 340 985 455 95 0.88 6.7 1.9 2
Y2-400M1-6 280 380 990 510 95.8 0.87 5.9 2.3 1.8
Y2-400M2-6 315 430 990 574 95.8 0.87 5.9 2.3 1.8
Y2-400M3-6 355 475 990 638 95.8 0.87 5.9 2.3 1.8
Y2-400L1-6 400 535 990 719 96.0 0.88 6.3 2.3 1.8
Y2-400L2-6 450 600 990 796 96.5 0.89 6.3 2.3 1.8
Synchronous Speed 750 rpm
Y2-801-8 0.18 0.25 630 0.88 51 0.61 3.3 1.8 1.9
Y2-802-8 0.25 0.34 640 1.15 54 0.61 3.3 1.8 1.9
Y2-90S-8 0.37 0.5 660 1.49 62 0.61 4 1.8 1.9
Y2-90L-8 0.55 0.75 660 2.18 63 0.61 4 1.8 2
Y2-100L1-8 0.75 1 680 2.39 71 0.67 4 1.8 2
Y2-100L2-8 1.1 1.5 680 3.32 73 0.69 5 1.8 2
Y2-112M-8 1.5 2 690 4.5 75 0.69 5 1.8 2
Y2-132S-8 2.2 3 690 6 78 0.71 6 1.8 2
Y2-132M-8 3 4 710 7.9 79 0.73 6 1.8 2
Y2-160M1-8 4 5 710 10.3 81 0.73 6 1.9 2
Y2-160M2-8 5.5 7.5 720 13.6 83 0.74 6 2 2
Y2-160L-8 7.5 10 720 17.8 85.5 0.75 6 2 2
Y2-180L-8 11 15 730 25.1 87.5 0.76 6.6 2 2
Y2-200L-8 15 20 730 34.1 88 0.76 6.6 2 2
Y2-225S-8 18.5 25 730 40.6 90 0.76 6.6 1.9 2
Y2-225M-8 22 30 740 47.4 90.5 0.78 6.6 1.9 2
Y2-250M-8 30 40 740 64 91 0.79 6.6 1.9 2
Y2-280S-8 37 50 740 78 91.5 0.79 6.6 1.9 2
Y2-280M-8 45 60 740 94 92 0.79 6.6 1.9 2
Y2-315S-8 55 75 740 111 92.8 0.81 6.6 1.8 2
Y2-315M-8 75 100 740 151 93 0.81 6.6 1.8 2
Y2-315L1-8 90 125 740 178 93.8 0.82 6.6 1.8 2
Y2-315L2-8 110 150 740 217 94 0.82 7.2 1.8 2
Y2-355M1-8 132 180 740 261 93.7 0.82 7.2 1.8 2
Y2-355M2-8 160 200 740 315 94.2 0.82 7.2 1.8 2
Y2-355L-8 200 270 740 388 94.5 0.83 7.2 1.8 2
Y2-400M1-8 250 340 745 494 95.0 0.81 6.2 2.3 1.8
Y2-400M2-8 280 380 745 552 95.0 0.82 6.2 2.3 1.8
Y2-400L1-8 315 430 745 592 95.0 0.85 6.2 2.3 1.8
Y2-400L2-8 355 475 745 692 95.0 0.85 6.2 2.3 1.8
Y2-400L3-8 400 535 745 780 95.0 0.85 6.2 2.3 1.8
Synchronous Speed 600 rpm
Y2-315S-10 45 60 590 100 91.5 0.75 6.2 1.5 2
Y2-315M-10 55 75 590 121 92 0.75 6.2 1.5 2
Y2-315L1-10 75 100 590 162 92.5 0.76 6.2 1.2 2
Y2-315L2-10 90 125 590 191 93 0.77 6.2 1.5 2
Y2-355M1-10 110 150 590 230 93.2 0.78 6 1.3 2
Y2-355M2-10 132 180 590 275 93.5 0.78 6 1.3 2
Y2-355L-10 160 200 590 334 93.5 0.78 6 1.3 2
Y2-400M1-10 200 270 595 404 95.0 0.80 6.2 2.6 1.8
Y2-400M2-10 250 340 595 495 95.0 0.81 6.2 2.6 1.8
Y2-400L1-10 280 380 595 554 95.0 0.82 6.2 2.6 1.8
Y2-400L2-10 315 430 595 630 95.0 0.82 6.2 2.6 1.8

Detailed Photos

 

 

Our OEM Motors, Diesel generator sets ,Alternators are talior made to fit the OEM customer’s application.  Our  based Engineering Design team work with you to ensure the motor meets your individual needs.

2 ,4,6 ,8 and 10 pole operation.  with CE Approvals available
All Motors, Diesel generator sets ,Alternators may be designed for optional voltages and frequencies.

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial
Speed: Variable Speed
Number of Stator: Three-Phase
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

gear motor

Are there innovations or emerging technologies in the field of gear motor design?

Yes, there are several innovations and emerging technologies in the field of gear motor design. These advancements aim to improve the performance, efficiency, compactness, and reliability of gear motors. Here are some notable innovations and emerging technologies in gear motor design:

1. Miniaturization and Compact Design:

Advancements in manufacturing techniques and materials have enabled the miniaturization of gear motors without compromising their performance. Gear motors with compact designs are highly sought after in applications where space is limited, such as robotics, medical devices, and consumer electronics. Innovative approaches like micro-gear motors and integrated motor-gear units are being developed to achieve smaller form factors while maintaining high torque and efficiency.

2. High-Efficiency Gearing:

New gear designs focus on improving efficiency by reducing friction and mechanical losses. Advanced gear manufacturing techniques, such as precision machining and 3D printing, allow for the creation of intricate gear tooth profiles that optimize power transmission and minimize losses. Additionally, the use of high-performance materials, coatings, and lubricants helps reduce friction and wear, improving overall gear motor efficiency.

3. Magnetic Gearing:

Magnetic gearing is an emerging technology that replaces traditional mechanical gears with magnetic fields to transmit torque. It utilizes the interaction of permanent magnets to transfer power, eliminating the need for physical gear meshing. Magnetic gearing offers advantages such as high efficiency, low noise, compactness, and maintenance-free operation. While still being developed and refined, magnetic gearing holds promise for various applications, including gear motors.

4. Integrated Electronics and Controls:

Gear motor designs are incorporating integrated electronics and controls to enhance performance and functionality. Integrated motor drives and controllers simplify system integration, reduce wiring complexity, and allow for advanced control features. These integrated solutions offer precise speed and torque control, intelligent feedback mechanisms, and connectivity options for seamless integration into automation systems and IoT (Internet of Things) platforms.

5. Smart and Condition Monitoring Capabilities:

New gear motor designs incorporate smart features and condition monitoring capabilities to enable predictive maintenance and optimize performance. Integrated sensors and monitoring systems can detect abnormal operating conditions, track performance parameters, and provide real-time feedback for proactive maintenance and troubleshooting. This helps prevent unexpected failures, extend the lifespan of gear motors, and improve overall system reliability.

6. Energy-Efficient Motor Technologies:

Gear motor design is influenced by advancements in energy-efficient motor technologies. Brushless DC (BLDC) motors and synchronous reluctance motors (SynRM) are gaining popularity due to their higher efficiency, better power density, and improved controllability compared to traditional brushed DC and induction motors. These motor technologies, when combined with optimized gear designs, contribute to overall system energy savings and performance improvements.

These are just a few examples of the innovations and emerging technologies in gear motor design. The field is continuously evolving, driven by the need for more efficient, compact, and reliable motion control solutions in various industries. Gear motor manufacturers and researchers are actively exploring new materials, manufacturing techniques, control strategies, and system integration approaches to meet the evolving demands of modern applications.

gear motor

Can gear motors be used for precise positioning, and if so, what features enable this?

Yes, gear motors can be used for precise positioning in various applications. The combination of gear mechanisms and motor control features enables gear motors to achieve accurate and repeatable positioning. Here’s a detailed explanation of the features that enable gear motors to be used for precise positioning:

1. Gear Reduction:

One of the key features of gear motors is their ability to provide gear reduction. Gear reduction refers to the process of reducing the output speed of the motor while increasing the torque. By using the appropriate gear ratio, gear motors can achieve finer control over the rotational movement, allowing for more precise positioning. The gear reduction mechanism enables the motor to rotate at a slower speed while maintaining higher torque, resulting in improved accuracy and control.

2. High Resolution Encoders:

Many gear motors are equipped with high-resolution encoders. An encoder is a device that measures the position and speed of the motor shaft. High-resolution encoders provide precise feedback on the motor’s rotational position, allowing for accurate position control. The encoder signals are used in conjunction with motor control algorithms to ensure precise positioning by monitoring and adjusting the motor’s movement in real-time. The use of high-resolution encoders greatly enhances the gear motor’s ability to achieve precise and repeatable positioning.

3. Closed-Loop Control:

Gear motors with closed-loop control systems offer enhanced positioning capabilities. Closed-loop control involves continuously comparing the actual motor position (as measured by the encoder) with the desired position and making adjustments to minimize any position error. The closed-loop control system uses feedback from the encoder to adjust the motor’s speed, direction, and torque, ensuring accurate positioning even in the presence of external disturbances or variations in the load. Closed-loop control enables gear motors to actively correct for position errors and maintain precise positioning over time.

4. Stepper Motors:

Stepper motors are a type of gear motor that provides excellent precision and control for positioning applications. Stepper motors operate by converting electrical pulses into incremental steps of movement. Each step corresponds to a specific angular displacement, allowing precise positioning control. Stepper motors offer high step resolution, allowing for fine position adjustments. They are commonly used in applications that require precise positioning, such as robotics, 3D printers, and CNC machines.

5. Servo Motors:

Servo motors are another type of gear motor that excels in precise positioning tasks. Servo motors combine a motor, a feedback device (such as an encoder), and a closed-loop control system. They offer high torque, high speed, and excellent positional accuracy. Servo motors are capable of dynamically adjusting their speed and torque to maintain the desired position accurately. They are widely used in applications that require precise and responsive positioning, such as industrial automation, robotics, and camera pan-tilt systems.

6. Motion Control Algorithms:

Advanced motion control algorithms play a crucial role in enabling gear motors to achieve precise positioning. These algorithms, implemented in motor control systems or dedicated motion controllers, optimize the motor’s behavior to ensure accurate positioning. They take into account factors such as acceleration, deceleration, velocity profiling, and jerk control to achieve smooth and precise movements. Motion control algorithms enhance the gear motor’s ability to start, stop, and position accurately, reducing position errors and overshoot.

By leveraging gear reduction, high-resolution encoders, closed-loop control, stepper motors, servo motors, and motion control algorithms, gear motors can be effectively used for precise positioning in various applications. These features enable gear motors to achieve accurate and repeatable positioning, making them suitable for tasks that require precise control and reliable positioning performance.

gear motor

How does the gearing mechanism in a gear motor contribute to torque and speed control?

The gearing mechanism in a gear motor plays a crucial role in controlling torque and speed. By utilizing different gear ratios and configurations, the gearing mechanism allows for precise manipulation of these parameters. Here’s a detailed explanation of how the gearing mechanism contributes to torque and speed control in a gear motor:

The gearing mechanism consists of multiple gears with varying sizes, tooth configurations, and arrangements. Each gear in the system engages with another gear, creating a mechanical connection. When the motor rotates, it drives the rotation of the first gear, which then transfers the motion to subsequent gears, ultimately resulting in the output shaft’s rotation.

Torque Control:

The gearing mechanism in a gear motor enables torque control through the principle of mechanical advantage. The gear system utilizes gears with different numbers of teeth, known as gear ratio, to adjust the torque output. When a smaller gear (pinion) engages with a larger gear (gear), the pinion rotates faster than the gear but exerts more force or torque. This results in torque amplification, allowing the gear motor to deliver higher torque at the output shaft while reducing the rotational speed. Conversely, if a larger gear engages with a smaller gear, torque reduction occurs, resulting in higher rotational speed at the output shaft.

By selecting the appropriate gear ratio, the gearing mechanism effectively adjusts the torque output of the gear motor to match the requirements of the application. This torque control capability is essential in applications that demand high torque for heavy lifting or overcoming resistance, as well as applications that require lower torque but higher rotational speed.

Speed Control:

The gearing mechanism also contributes to speed control in a gear motor. The gear ratio determines the relationship between the rotational speed of the input shaft (driven by the motor) and the output shaft. When a gear motor has a higher gear ratio (more teeth on the driven gear compared to the driving gear), it reduces the output speed while increasing the torque. Conversely, a lower gear ratio increases the output speed while reducing the torque.

By choosing the appropriate gear ratio, the gearing mechanism allows for precise speed control in a gear motor. This is particularly useful in applications that require specific speed ranges or variations, such as conveyor systems, robotic movements, or machinery that needs to operate at different speeds for different tasks. The speed control capability of the gearing mechanism enables the gear motor to match the desired speed requirements of the application accurately.

In summary, the gearing mechanism in a gear motor contributes to torque and speed control by utilizing different gear ratios and configurations. It enables torque amplification or reduction, depending on the gear arrangement, allowing the gear motor to deliver the required torque output. Additionally, the gear ratio also determines the relationship between the rotational speed of the input and output shafts, providing precise speed control. These torque and speed control capabilities make gear motors versatile and suitable for a wide range of applications in various industries.

China best Three Phase Asynchronous AC Induction Electric Gear Reducer Fan Blower Vacuum Air Compressor Water Pump Universal Industry Machine Motor   vacuum pump ac system	China best Three Phase Asynchronous AC Induction Electric Gear Reducer Fan Blower Vacuum Air Compressor Water Pump Universal Industry Machine Motor   vacuum pump ac system
editor by CX 2024-02-11

China factory RS485 Canopen Pulse Optional RoHS CE Reach 17bit Absolute Encoder Driver 0.64nm Integrated 3000rpm 400W 48V Brushless DC Servo Motor with Gearbox Brake Fan vacuum pump distributors

Product Description

Product Description

Model naming rules for low voltage integrated dc servo motor

1. Company name abbreviation
2. Product series model, indicating that the motor is an IDS series, referring to the acronym for integrated DC servo
3. Frame number (42/57/60/80), expressed in millimeters by the dimensions of the motor casing and mounting plate
4. Control method optional (P/R/C) P represents pulse, R represents RS485, and C represents CANopen bus
5. The motor model, such as (01/02/03/04/05/06), represents the model of the motor 6.Encoder type: A represents a 17 bit single turn absolute encoder

 

Characteristics of Integrated Dc Servo Motor

1. Compact: Integrated design of integrated drive motor Easy installation, small footprint, and simple wiring.

2. Multiple motion control modes: Supports the CiA402 standard protocol, including Relative position mode, absolute position mode, speed Mode, torque mode, and CHINAMFG regression mode.

3. low-power consumption: Adopting low internal resistance MOS to ensure motor performance Excellent torque utilization while reducing motor power consumption And heat generation, effectively extending the service life of

the motor.

4. control mode: Supports pulse/RS485/CANopen.

5. Multi segment position speed function: With multi segment position function and multi segment speed function.

6. Safe and reliable: Driver built-in in place and alarm output signal Convenient for upper computer detection and control built-in Multiple alarm functions such as over differential, over undervoltage, and over temperature Can ensure the safe operation of processing equipment.
 

Integrated solution for precision control motors

 

Traditional split solution

Features:

1.  Adopting a new 32-bit M4+core with 120M or 240M main frequency
2. Stable torque characteristics from low to high speeds, with high speed and precision
3. Equipped with brake resistor interface to prevent damage to the electromechanical braking system
4. Wide speed range, low temperature rise, and high efficiency
5. Integrated motor and drive, compact size, simple wiring, and drive Good compatibility with the motor
6. Equipped with overcurrent, overvoltage, over temperature, and over differential protection functions
7. Configure a 17bit single turn absolute encoder

 

Communication method:

1. Pulse type

2. RS485 MOdbus RTU network type

3. CANopen network type

 

Protection level:

Waterproof type: IP30, IP54, IP65, optional

 

Usage:

Medical equipment, logistics transportation, industrial automation, textile machinery, laser, drawing, traditional Chinese
medicine ingredient industry, etc

Product Parameters

42mm Integrated Servo Motor (Gearbox optional)

Model Power (W) Rated Voltage (VDC) Rated Current (A) Rated Speed (rpm) Rated Torque (N.m) Total height L (mm) Encoder Control method (optional)
JKIDS42-P01A 26 24 1.8 4000 0.0625 61 17bit Pulse RS485 CANopen
JKIDS42-P02A 53 24 3.3 4000 0.125 81 17bit Pulse RS485 CANopen
JKIDS42-P03A 78 24 4.5 4000 0.185 101 17bit Pulse RS485 CANopen
JKIDS42-P04A 78 24 4.5 3000 0.25 120 17bit Pulse RS485 CANopen

Product Drawing
Product Images

57mm Integrated Servo Motor (Gearbox / Brake optional) 

Model Power (W) Rated Voltage (VDC) Rated Current (A) Rated Speed (rpm) Rated Torque (N.m) Total height L (mm) Encoder Control method (optional)
JKIDS57-P01A 26 24/36 3.5 3000 0.29 101 17bit pulse RS485 CANopen
JKIDS57-P02A 53 24/36 5.4 3000 0.45 121 17bit pulse RS485 CANopen
JKIDS57-P03A 78 36/48 7.5 3000 0.64 141 17bit pulse RS485 CANopen

Product Drawing
Product Images

60mm Integrated Servo Motor (Gearbox / Brake / Cooling Fan optional) 

Model Power (W) Rated Voltage (VDC) Rated Current (A) Rated Speed (rpm) Rated Torque (N.m) Total height L (mm) Encoder Control method (optional)
JKIDS60-P01A 200 24 12 3000 0.64 94 17bit pulse RS485 CANopen
JKIDS60-P02A 400 48 11 3000 1.27 112 17bit pulse RS485 CANopen

Product Drawing
Product Images

80mm Integrated Servo Motor (Gearbox / Brake / Cooling Fan optional) 

Model Power (W) Rated Voltage (VDC) Rated Current (A) Rated Speed (rpm) Rated Torque (N.m) Total height L (mm) Encoder Control method (optional)
JKIDS80-P01A 750 48/72 19/12 3000 2.4 155 17bit pulse RS485 CANopen
JKIDS80-P02A 1000 72 17 3000 3.2 175 17bit pulse RS485 CANopen

Product Drawing
Product Images

 

 

 

Company Profile

HangZhou CHINAMFG Co., Ltd was a high technology industry zone in HangZhou, china. Our products used in many kinds of machines, such as 3d printer CNC machine, medical equipment, weaving printing equipments and so on.
JKONGMOTOR warmly welcome ‘OEM’ & ‘ODM’ cooperations and other companies to establish long-term cooperation with us.
Company spirit of sincere and good reputation, won the recognition and support of the broad masses of customers, at the same time with the domestic and foreign suppliers close community of interests, the company entered the stage of stage of benign development, laying a CHINAMFG foundation for the strategic goal of realizing only really the sustainable development of the company.

Equipments Show:

Production Flow:

Certification:

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial, Power Tools, Medical Equipment
Operating Speed: High Speed
Excitation Mode: Shunt
Samples:
US$ 90/Piece
1 Piece(Min.Order)

|

Order Sample

need to confirm the cost with seller
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

servo motor

Where can individuals find reliable resources for learning more about servo motors and their applications?

Individuals interested in learning more about servo motors and their applications can access a variety of reliable resources. These resources provide valuable information, technical knowledge, and practical insights. Here are some places where individuals can find reliable resources for expanding their understanding of servo motors:

1. Manufacturer Websites:

Leading servo motor manufacturers often provide detailed documentation, technical specifications, application notes, and white papers on their websites. These resources offer in-depth information about their products, technologies, and best practices for servo motor applications. Users can visit the websites of prominent manufacturers to access reliable and up-to-date information.

2. Industry Associations and Organizations:

Industry associations and organizations related to automation, robotics, or specific industries often offer educational materials and resources on servo motors. They may provide technical publications, webinars, seminars, and training programs focused on servo motor technology and applications. Examples of such organizations include the International Society of Automation (ISA), the Robotics Industries Association (RIA), and the Society of Automotive Engineers (SAE).

3. Books and Technical Publications:

Books dedicated to servo motor technology, control systems, and industrial automation can provide comprehensive knowledge on the subject. Some recommended titles include “Servo Motors and Industrial Control Theory” by Riazollah Firoozian, “Electric Motors and Drives: Fundamentals, Types, and Applications” by Austin Hughes and Bill Drury, and “Servo Motors and Motion Control: An Introduction” by Albert F. Seabury. Technical publications and journals such as IEEE Transactions on Industrial Electronics and Control Engineering Practice also offer valuable insights and research findings.

4. Online Courses and Training Platforms:

Various online learning platforms offer courses and training programs focused on servo motors and their applications. Websites like Udemy, Coursera, and LinkedIn Learning provide access to video-based courses taught by industry experts. These courses cover topics such as servo motor fundamentals, motion control, programming, and troubleshooting. By enrolling in these courses, individuals can acquire structured knowledge and practical skills related to servo motors.

5. Technical Forums and Discussion Groups:

Participating in technical forums and discussion groups can be an effective way to learn from industry professionals and enthusiasts. Websites like Stack Exchange, Reddit, and engineering-focused forums host discussions on servo motors, where individuals can ask questions, share experiences, and gain insights from the community. It’s important to verify the credibility of the information shared in such forums and rely on responses from trusted contributors.

6. Trade Shows and Conferences:

Attending trade shows, exhibitions, and conferences related to automation, robotics, or specific industries can provide opportunities to learn about servo motors. These events often feature presentations, workshops, and demonstrations by industry experts and manufacturers. Participants can gain hands-on experience, interact with professionals, and stay updated with the latest advancements in servo motor technology.

By leveraging these reliable resources, individuals can deepen their knowledge and understanding of servo motors and their applications. It is advisable to consult multiple sources and cross-reference information to ensure a comprehensive understanding of the subject.

servo motor

How is the size of a servo motor determined based on application requirements?

The size of a servo motor is an important consideration when selecting a motor for a specific application. The size of the motor is determined based on various factors related to the application requirements. Let’s explore how the size of a servo motor is determined:

1. Torque Requirements:

One of the primary factors in determining the size of a servo motor is the torque requirements of the application. The motor should be able to generate sufficient torque to handle the load and overcome any resistance or friction in the system. The required torque depends on factors such as the weight of the load, the distance from the motor’s axis of rotation, and any additional forces acting on the system. By analyzing the torque requirements, one can select a servo motor with an appropriate size and torque rating to meet the application’s needs.

2. Speed and Acceleration Requirements:

The desired speed and acceleration capabilities of the application also influence the size of the servo motor. Different applications have varying speed and acceleration requirements, and the motor needs to be capable of achieving the desired performance. Higher speeds and accelerations may require larger motors with more powerful components to handle the increased forces and stresses. By considering the required speed and acceleration, one can determine the size of the motor that can meet these demands.

3. Inertia and Load Inertia Ratio:

The inertia of the load and the inertia ratio between the load and the servo motor are important considerations in sizing the motor. Inertia refers to the resistance of an object to changes in its rotational motion. If the load has a high inertia, it requires a servo motor with sufficient size and torque to accelerate and decelerate the load effectively. The inertia ratio, which is the ratio of the load inertia to the motor inertia, affects the motor’s ability to control the load’s motion accurately. A proper balance between the load and motor inertia is necessary to achieve optimal performance and stability in the system.

4. Duty Cycle and Continuous Operation:

The duty cycle and continuous operation requirements of the application also impact the motor size selection. Duty cycle refers to the ratio of the motor’s operating time to the total cycle time. Applications with high-duty cycles or continuous operation may require larger motors that can handle sustained operation without overheating or performance degradation. It is important to consider the motor’s continuous torque rating and thermal characteristics to ensure it can operate reliably under the given duty cycle requirements.

5. Physical Space Constraints:

The physical space available for installing the servo motor is another factor to consider. The motor’s dimensions should fit within the available space, considering factors such as motor length, diameter, and any mounting requirements. It is essential to ensure that the chosen motor can be easily integrated into the system without interfering with other components or causing space constraints.

6. Weight Limitations:

The weight limitations of the application may influence the motor size selection. If there are weight restrictions, such as in mobile or lightweight applications, it is necessary to choose a servo motor that is compact and lightweight while still providing the required performance. Lighter servo motors can help optimize the overall weight and balance of the system.

7. Cost Considerations:

Cost is also a factor to consider when determining the size of a servo motor. Larger motors with higher torque and performance capabilities tend to be more expensive. It is important to strike a balance between the required performance and the cost constraints of the application. Analyzing the cost-effectiveness and overall value of the motor in relation to the application requirements is essential.

By considering these factors, one can determine the appropriate size of a servo motor that can meet the specific application requirements. It is advisable to consult with manufacturers or experts in the field to ensure the chosen motor size aligns with the application needs and provides optimal performance and reliability.

servo motor

What are the key advantages of using servo motors in industrial applications?

Servo motors offer several key advantages that make them highly beneficial for a wide range of industrial applications. Here are some of the main advantages of using servo motors:

1. Precise Positioning:

Servo motors excel at precise positioning control. They can accurately move to specific angles or positions with high repeatability. This level of precision is crucial in applications where accurate and consistent positioning is required, such as robotics, CNC machining, and assembly lines.

2. High Torque at Various Speeds:

Servo motors are designed to deliver high torque output across a range of speeds. They can generate significant torque even at low speeds, enabling efficient operation in applications that require both high torque and precise control, such as lifting heavy loads or performing intricate movements.

3. Fast Response Times:

Servo motors have fast response times, meaning they can quickly accelerate, decelerate, and change direction in response to control signals. This responsiveness is essential in applications where rapid and dynamic motion control is needed, such as industrial automation, robotics, and production line equipment.

4. Closed-Loop Control:

Servo motors operate in a closed-loop control system, where feedback from position sensors is continuously used to adjust the motor’s behavior. This feedback control mechanism enables accurate tracking of the desired position and compensates for any disturbances or variations that may occur during operation. It enhances the motor’s accuracy, stability, and performance.

5. Wide Range of Sizes and Power Ratings:

Servo motors are available in a wide range of sizes and power ratings, making them suitable for diverse industrial applications. Whether it’s a small motor for precision tasks or a large motor for heavy-duty operations, there are servo motor options to meet various requirements.

6. Energy Efficiency:

Servo motors are designed to be energy-efficient. They typically have high power density, which means they can deliver a significant amount of torque per unit of size and weight. This efficiency helps reduce power consumption, lowers operating costs, and contributes to a greener and more sustainable industrial environment.

7. Flexibility and Adaptability:

Due to their versatility, servo motors can be easily integrated into different systems and applications. They can be combined with various control systems, sensors, and communication protocols to provide seamless integration and compatibility with existing industrial setups. This flexibility allows for customized and scalable solutions tailored to specific industrial requirements.

8. Durability and Reliability:

Servo motors are known for their durability and reliability, even in demanding industrial environments. They are built to withstand harsh conditions such as high temperatures, vibrations, and dust. This robust construction ensures long-term operation and minimizes downtime, contributing to increased productivity and reduced maintenance costs.

In summary, the key advantages of using servo motors in industrial applications include precise positioning, high torque at various speeds, fast response times, closed-loop control for accuracy and stability, a wide range of sizes and power ratings, energy efficiency, flexibility, and durability. These advantages make servo motors highly valuable for industries that require precise motion control, such as robotics, manufacturing, automation, CNC machining, and many others.

China factory RS485 Canopen Pulse Optional RoHS CE Reach 17bit Absolute Encoder Driver 0.64nm Integrated 3000rpm 400W 48V Brushless DC Servo Motor with Gearbox Brake Fan   vacuum pump distributorsChina factory RS485 Canopen Pulse Optional RoHS CE Reach 17bit Absolute Encoder Driver 0.64nm Integrated 3000rpm 400W 48V Brushless DC Servo Motor with Gearbox Brake Fan   vacuum pump distributors
editor by CX 2024-01-15

China high quality AC12V 5V AC24V 220V 4W Tyc-50 Synchronous Gear Motor for Fan 03 vacuum pump diy

Product Description

AC12V 5V AC24V 220V 4W tyc-50 synchronous gear motor Permanent magnet synchronous motor for fan 03 

2
Product features:  

1. New arrival, small noise, high quality components, fair price, etc.

2. Protections: over voltage, over temperature, over current, overload, short circuit protection.   

3. CKD SKD OEM ODM customization services available.

4. We have very strong R&D capabilities. 20 years experience of development and innovation engineers, can provide you from software programming to PCB design proofing, PCB CHINAMFG processing and finished product assembly supporting, to achieve a one-stop service.

 

Detailed Photos

Product Parameters

 

                                   Product Name: Synchronous Motor TYC-50
                                   Rated Volatge: AC5V,AC12V,AC24V ,AC220V
                                   Rated Frequence: 50/60Hz
                                   No-load Speed: 2.5/3rpm (customizable) 
                                   Output torque: 8KGF.CM
                                   Output power: ≤4W
                                   Noise: <40db
                                   Temperature Rise: <70K
                                   Direction of rotation: CW/CCW
                                   The Product is widely used in: gluing machine,fan shaking head,state lighting equipment,oven and other fields.

 

Certifications

Packaging & Shipping

Company Profile

HangZhou DJYOKE Electronics Co., Ltd. was founded in July 2013, located in HangZhou, China.
    The company is mainly engaged in the whole system of development, manufacturing and marketing of the electronic products, MCU and embedded system.
    We have much experience and competitive advantages on development & mass production in power module, sensor module solar inverter and application module, 433, power line carrier, 485. LORA, Bluetooth signal transmission module and so on.
2
Following are our main business:
1) AC/DC power module, such as Led driver, power supply, adapter and charger.
2) DC/DC power module.
3) DC/AC high power inverter, Mobile Power Station with solar panel.
4) Domestic solar-electric system.
5) MCU system development and mass production services.
6) Electronic PCBA design, Mould design, 3D print and Mass production service.
7) Plastic housing, Metal Housing buyer services.
8) SKD,CKD and all components buyer services.
2
It is our pleasure to provide service to you, welcome to consult and patronize!!!

FAQ

 

Q1: What is your MOQ of power supply?
A: Our MOQ is 5 pieces.

Q2: Can you accept OEM & ODM products, SKD & CKD services?
A: Highly welcome to customize all kinds of electrical power supply OEM & ODM products, and our company provide SKD & CKD services.

2
Q3: Can you offer sample?
A: Yes, we offer sample for you.

2
Q4: How to place an order?
A: You can place an order on our ” Ready To Send” product, or contact with our company sales person to place an order for you.

2
Q5: How to delivery to us the ordered products?
A: We usually delivery by sea, by China Europe train and by air. Use FedEx, DHL, UPS, EMS, TNT to delivery sample or small amount product.

2
Q6: How many years warranty of your power supply?
A: Can be 2 ~ 5 years warranty.

2
Q7: How could I pay for our order?
A: Pay by Alibaba Assurance order payment link, Western Union, T/T, L/C, PayPal or as your requirements. Then we will send you our bank details.

2
Q8: How long can I get my order?
A: For samples, if the samples are our company standard products, we will send you in 3 working days. If the samples are customized products, we will finish production and ship within 7~10 working days. For bulk orders, depends on your design and the quantities of products, usually 15 ~ 20 working days to send for you.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Household Appliances
Operating Speed: 2.5/3 Rpm
Operation Mode: Electric Motor
Magnetic Structure: Permanent Magnet
Function: Driving
Structure: Rotating Pole Type (Armature Fixed)
Samples:
US$ 1.5/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

gear motor

Are there innovations or emerging technologies in the field of gear motor design?

Yes, there are several innovations and emerging technologies in the field of gear motor design. These advancements aim to improve the performance, efficiency, compactness, and reliability of gear motors. Here are some notable innovations and emerging technologies in gear motor design:

1. Miniaturization and Compact Design:

Advancements in manufacturing techniques and materials have enabled the miniaturization of gear motors without compromising their performance. Gear motors with compact designs are highly sought after in applications where space is limited, such as robotics, medical devices, and consumer electronics. Innovative approaches like micro-gear motors and integrated motor-gear units are being developed to achieve smaller form factors while maintaining high torque and efficiency.

2. High-Efficiency Gearing:

New gear designs focus on improving efficiency by reducing friction and mechanical losses. Advanced gear manufacturing techniques, such as precision machining and 3D printing, allow for the creation of intricate gear tooth profiles that optimize power transmission and minimize losses. Additionally, the use of high-performance materials, coatings, and lubricants helps reduce friction and wear, improving overall gear motor efficiency.

3. Magnetic Gearing:

Magnetic gearing is an emerging technology that replaces traditional mechanical gears with magnetic fields to transmit torque. It utilizes the interaction of permanent magnets to transfer power, eliminating the need for physical gear meshing. Magnetic gearing offers advantages such as high efficiency, low noise, compactness, and maintenance-free operation. While still being developed and refined, magnetic gearing holds promise for various applications, including gear motors.

4. Integrated Electronics and Controls:

Gear motor designs are incorporating integrated electronics and controls to enhance performance and functionality. Integrated motor drives and controllers simplify system integration, reduce wiring complexity, and allow for advanced control features. These integrated solutions offer precise speed and torque control, intelligent feedback mechanisms, and connectivity options for seamless integration into automation systems and IoT (Internet of Things) platforms.

5. Smart and Condition Monitoring Capabilities:

New gear motor designs incorporate smart features and condition monitoring capabilities to enable predictive maintenance and optimize performance. Integrated sensors and monitoring systems can detect abnormal operating conditions, track performance parameters, and provide real-time feedback for proactive maintenance and troubleshooting. This helps prevent unexpected failures, extend the lifespan of gear motors, and improve overall system reliability.

6. Energy-Efficient Motor Technologies:

Gear motor design is influenced by advancements in energy-efficient motor technologies. Brushless DC (BLDC) motors and synchronous reluctance motors (SynRM) are gaining popularity due to their higher efficiency, better power density, and improved controllability compared to traditional brushed DC and induction motors. These motor technologies, when combined with optimized gear designs, contribute to overall system energy savings and performance improvements.

These are just a few examples of the innovations and emerging technologies in gear motor design. The field is continuously evolving, driven by the need for more efficient, compact, and reliable motion control solutions in various industries. Gear motor manufacturers and researchers are actively exploring new materials, manufacturing techniques, control strategies, and system integration approaches to meet the evolving demands of modern applications.

gear motor

How do gear motors compare to other types of motors in terms of power and efficiency?

Gear motors can be compared to other types of motors in terms of power output and efficiency. The choice of motor type depends on the specific application requirements, including the desired power level, efficiency, speed range, torque characteristics, and control capabilities. Here’s a detailed explanation of how gear motors compare to other types of motors in terms of power and efficiency:

1. Gear Motors:

Gear motors combine a motor with a gear mechanism to deliver increased torque output and improved control. The gear reduction enables gear motors to provide higher torque while reducing the output speed. This makes gear motors suitable for applications that require high torque, precise positioning, and controlled movements. However, the gear reduction process introduces mechanical losses, which can slightly reduce the overall efficiency of the system compared to direct-drive motors. The efficiency of gear motors can vary depending on factors such as gear quality, lubrication, and maintenance.

2. Direct-Drive Motors:

Direct-drive motors, also known as gearless or integrated motors, do not use a gear mechanism. They provide a direct connection between the motor and the load, eliminating the need for gear reduction. Direct-drive motors offer advantages such as high efficiency, low maintenance, and compact design. Since there are no gears involved, direct-drive motors experience fewer mechanical losses and can achieve higher overall efficiency compared to gear motors. However, direct-drive motors may have limitations in terms of torque output and speed range, and they may require more complex control systems to achieve precise positioning.

3. Stepper Motors:

Stepper motors are a type of gear motor that excels in precise positioning applications. They operate by converting electrical pulses into incremental steps of movement. Stepper motors offer excellent positional accuracy and control. They are capable of precise positioning and can hold a position without power. Stepper motors have relatively high torque at low speeds, making them suitable for applications that require precise control and positioning, such as robotics, 3D printers, and CNC machines. However, stepper motors may have lower overall efficiency compared to direct-drive motors due to the additional power required to overcome the detents between steps.

4. Servo Motors:

Servo motors are another type of gear motor known for their high torque, high speed, and excellent positional accuracy. Servo motors combine a motor, a feedback device (such as an encoder), and a closed-loop control system. They offer precise control over position, speed, and torque. Servo motors are widely used in applications that require accurate and responsive positioning, such as industrial automation, robotics, and camera pan-tilt systems. Servo motors can achieve high efficiency when properly optimized and controlled but may have slightly lower efficiency compared to direct-drive motors due to the additional complexity of the control system.

5. Efficiency Considerations:

When comparing power and efficiency among different motor types, it’s important to consider the specific requirements and operating conditions of the application. Factors such as load characteristics, speed range, duty cycle, and control requirements influence the overall efficiency of the motor system. While direct-drive motors generally offer higher efficiency due to the absence of mechanical losses from gears, gear motors can deliver higher torque output and enhanced control capabilities. The efficiency of gear motors can be optimized through proper gear selection, lubrication, and maintenance practices.

In summary, gear motors offer increased torque and improved control compared to direct-drive motors. However, gear reduction introduces mechanical losses that can slightly impact the overall efficiency of the system. Direct-drive motors, on the other hand, provide high efficiency and compact design but may have limitations in terms of torque and speed range. Stepper motors and servo motors, both types of gear motors, excel in precise positioning applications but may have slightly lower efficiency compared to direct-drive motors. The selection of the most suitable motor type depends on the specific requirements of the application, balancing power, efficiency, speed range, and control capabilities.

gear motor

Are there specific considerations for selecting the right gear motor for a particular application?

When selecting a gear motor for a specific application, several considerations need to be taken into account. The choice of the right gear motor is crucial to ensure optimal performance, efficiency, and reliability. Here’s a detailed explanation of the specific considerations for selecting the right gear motor for a particular application:

1. Torque Requirement:

The torque requirement of the application is a critical factor in gear motor selection. Determine the maximum torque that the gear motor needs to deliver to perform the required tasks. Consider both the starting torque (the torque required to initiate motion) and the operating torque (the torque required to sustain motion). Select a gear motor that can provide adequate torque to handle the load requirements of the application. It’s important to account for any potential torque spikes or variations during operation.

2. Speed Requirement:

Consider the desired speed range or specific speed requirements of the application. Determine the rotational speed (in RPM) that the gear motor needs to achieve to meet the application’s performance criteria. Select a gear motor with a suitable gear ratio that can achieve the desired speed at the output shaft. Ensure that the gear motor can maintain the required speed consistently and accurately throughout the operation.

3. Duty Cycle:

Evaluate the duty cycle of the application, which refers to the ratio of operating time to rest or idle time. Consider whether the application requires continuous operation or intermittent operation. Determine the duty cycle’s impact on the gear motor, including factors such as heat generation, cooling requirements, and potential wear and tear. Select a gear motor that is designed to handle the expected duty cycle and ensure long-term reliability and durability.

4. Environmental Factors:

Take into account the environmental conditions in which the gear motor will operate. Consider factors such as temperature extremes, humidity, dust, vibrations, and exposure to chemicals or corrosive substances. Choose a gear motor that is specifically designed to withstand and perform optimally under the anticipated environmental conditions. This may involve selecting gear motors with appropriate sealing, protective coatings, or materials that can resist corrosion and withstand harsh environments.

5. Efficiency and Power Requirements:

Consider the desired efficiency and power consumption of the gear motor. Evaluate the power supply available for the application and select a gear motor that operates within the specified voltage and current ranges. Assess the gear motor’s efficiency to ensure that it maximizes power transmission and minimizes wasted energy. Choosing an efficient gear motor can contribute to cost savings and reduced environmental impact.

6. Physical Constraints:

Assess the physical constraints of the application, including space limitations, mounting options, and integration requirements. Consider the size, dimensions, and weight of the gear motor to ensure it can be accommodated within the available space. Evaluate the mounting options and compatibility with the application’s mechanical structure. Additionally, consider any specific integration requirements, such as shaft dimensions, connectors, or interfaces that need to align with the application’s design.

7. Noise and Vibration:

Depending on the application, noise and vibration levels may be critical factors. Evaluate the acceptable noise and vibration levels for the application’s environment and operation. Choose a gear motor that is designed to minimize noise and vibration, such as those with helical gears or precision engineering. This is particularly important in applications that require quiet operation or where excessive noise and vibration may cause issues or discomfort.

By considering these specific factors when selecting a gear motor for a particular application, you can ensure that the chosen gear motor meets the performance requirements, operates efficiently, and provides reliable and consistent power transmission. It’s important to consult with gear motor manufacturers or experts to determine the most suitable gear motor based on the specific application’s needs.

China high quality AC12V 5V AC24V 220V 4W Tyc-50 Synchronous Gear Motor for Fan 03   vacuum pump diyChina high quality AC12V 5V AC24V 220V 4W Tyc-50 Synchronous Gear Motor for Fan 03   vacuum pump diy
editor by CX 2024-01-10

China Long Service Life 48V 80zyt Brush Pm DC Planetary Gear Motor Table Fan Motor for Door Opener brushless motor

Solution Description

48v 80ZYT Brush Pm DC Planetary Gear Motor table enthusiast motor for Doorway Opener
Peaceful, secure and trustworthy for long lifestyle procedure
1.Diameters: 80mm
two.Lengths:  108mm128mm148mm
3.Constant torques: .50Nm0.82Nm0.65Nm
4.Power: 106W180W140W
five.Speeds up to 2030rpm2100rpm2050rpm
six.Environmental conditions: -10~+40°C
seven.Variety of poles:4
eight.Mangnet material:Challenging Ferrit
9.Insulation class:B
ten.Optional: digital drivers, encoders and gearheads, as nicely as Corridor result resolver and sensorless suggestions
11.We can style the particular voltage and shaft, and so on

Design 80ZYT4-01 80ZYT4-02 80ZYT4-03
Voltage V 24
No load pace rpm 2380 2460 2390
Rated torque Nm .50  .eighty two 1.10 
Rated pace rpm 2030 2100 2050
Rated present A 6.five ten.seven 14.0 
Stall torque Nm three.40  five.fifty eight seven.90 
Stall current A 37.four sixty three.2 eighty four.6
Rotor inertia Kgmm² 420 550 seven hundred
Again-EMF continuous V/krpm 9.8 nine.five nine.8
Torque Continual Nm/A .571 . 0571 .571
Resistance(20ºC) ohm .sixty five .38 .28
Excess weight Kg one.seven 2.0  two.3
L1 mm 108 128 148
Rotor:La mm thirty 50 70

Standard type of shaft

 


/ Piece
|
10 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools, Medical Equpiments
Operating Speed: Constant Speed
Excitation Mode: Compound
Function: Driving
Number of Poles: 2
Structure and Working Principle: Brush

###

Samples:
US$ 28/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Model 80ZYT4-01 80ZYT4-02 80ZYT4-03
Voltage V 24
No load speed rpm 2380 2460 2390
Rated torque Nm 0.50  0.82 1.10 
Rated speed rpm 2030 2100 2050
Rated current A 6.5 10.7 14.0 
Stall torque Nm 3.40  5.58 7.90 
Stall current A 37.4 63.2 84.6
Rotor inertia Kgmm² 420 550 700
Back-EMF constant V/krpm 9.8 9.5 9.8
Torque Constant Nm/A 0.0935 0.0906 0.0934
Resistance(20ºC) ohm 0.65 0.38 0.28
Weight Kg 1.7 2.0  2.3
L1 mm 108 128 148
Rotor:La mm 30 50 70

/ Piece
|
10 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools, Medical Equpiments
Operating Speed: Constant Speed
Excitation Mode: Compound
Function: Driving
Number of Poles: 2
Structure and Working Principle: Brush

###

Samples:
US$ 28/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Model 80ZYT4-01 80ZYT4-02 80ZYT4-03
Voltage V 24
No load speed rpm 2380 2460 2390
Rated torque Nm 0.50  0.82 1.10 
Rated speed rpm 2030 2100 2050
Rated current A 6.5 10.7 14.0 
Stall torque Nm 3.40  5.58 7.90 
Stall current A 37.4 63.2 84.6
Rotor inertia Kgmm² 420 550 700
Back-EMF constant V/krpm 9.8 9.5 9.8
Torque Constant Nm/A 0.0935 0.0906 0.0934
Resistance(20ºC) ohm 0.65 0.38 0.28
Weight Kg 1.7 2.0  2.3
L1 mm 108 128 148
Rotor:La mm 30 50 70

The Basics of a Planetary Motor

A Planetary Motor is a type of gearmotor that uses multiple planetary gears to deliver torque. This system minimizes the chances of failure of individual gears and increases output capacity. Compared to the planetary motor, the spur gear motor is less complex and less expensive. However, a spur gear motor is generally more suitable for applications requiring low torque. This is because each gear is responsible for the entire load, limiting its torque.

Self-centering planetary gears

This self-centering mechanism for a planetary motor is based on a helical arrangement. The helical structure involves a sun-planet, with its crown and slope modified. The gears are mounted on a ring and share the load evenly. The helical arrangement can be either self-centering or self-resonant. This method is suited for both applications.
A helical planetary gear transmission is illustrated in FIG. 1. A helical configuration includes an output shaft 18 and a sun gear 18. The drive shaft extends through an opening in the cover to engage drive pins on the planet carriers. The drive shaft of the planetary gears can be fixed to the helical arrangement or can be removable. The transmission system is symmetrical, allowing the output shaft of the planetary motor to rotate radially in response to the forces acting on the planet gears.
A flexible pin can improve load sharing. This modification may decrease the face load distribution, but increases the (K_Hbeta) parameter. This effect affects the gear rating and life. It is important to understand the effects of flexible pins. It is worth noting that there are several other disadvantages of flexible pins in helical PGSs. The benefits of flexible pins are discussed below.
Using self-centering planetary gears for a helical planetary motor is essential for symmetrical force distribution. These gears ensure the symmetry of force distribution. They can also be used for self-centering applications. Self-centering planetary gears also guarantee the proper force distribution. They are used to drive a planetary motor. The gearhead is made of a ring gear, and the output shaft is supported by two ball bearings. Self-centering planetary gears can handle a high torque input, and can be suited for many applications.
To solve for a planetary gear mechanism, you need to find its pitch curve. The first step is to find the radius of the internal gear ring. A noncircular planetary gear mechanism should be able to satisfy constraints that can be complex and nonlinear. Using a computer, you can solve for these constraints by analyzing the profile of the planetary wheel’s tooth curve.
Motor

High torque

Compared to the conventional planetary motors, high-torque planetary motors have a higher output torque and better transmission efficiency. The high-torque planetary motors are designed to withstand large loads and are used in many types of applications, such as medical equipment and miniature consumer electronics. Their compact design makes them suitable for small space-saving applications. In addition, these motors are designed for high-speed operation.
They come with a variety of shaft configurations and have a wide range of price-performance ratios. The FAULHABER planetary gearboxes are made of plastic, resulting in a good price-performance ratio. In addition, plastic input stage gears are used in applications requiring high torques, and steel input stage gears are available for higher speeds. For difficult operating conditions, modified lubrication is available.
Various planetary gear motors are available in different sizes and power levels. Generally, planetary gear motors are made of steel, brass, or plastic, though some use plastic for their gears. Steel-cut gears are the most durable, and are ideal for applications that require a high amount of torque. Similarly, nickel-steel gears are more lubricated and can withstand a high amount of wear.
The output torque of a high-torque planetary gearbox depends on its rated input speed. Industrial-grade high-torque planetary gearboxes are capable of up to 18000 RPM. Their output torque is not higher than 2000 nm. They are also used in machines where a planet is decelerating. Their working temperature ranges between 25 and 100 degrees Celsius. For best results, it is best to choose the right size for the application.
A high-torque planetary gearbox is the most suitable type of high-torque planetary motor. It is important to determine the deceleration ratio before buying one. If there is no product catalog that matches your servo motor, consider buying a close-fitting high-torque planetary gearbox. There are also high-torque planetary gearboxes available for custom-made applications.
Motor

High efficiency

A planetary gearbox is a type of mechanical device that is used for high-torque transmission. This gearbox is made of multiple pairs of gears. Large gears on the output shaft mesh with small gears on the input shaft. The ratio between the big and small gear teeth determines the transmittable torque. High-efficiency planetary gearheads are available for linear motion, axial loads, and sterilizable applications.
The AG2400 high-end gear unit series is ideally matched to Beckhoff’s extensive line of servomotors and gearboxes. Its single-stage and multi-stage transmission ratios are highly flexible and can be matched to different robot types. Its modified lubrication helps it operate in difficult operating conditions. These high-performance gear units are available in a wide range of sizes.
A planetary gear motor can be made of steel, nickel-steel, or brass. In addition to steel, some models use plastic. The planetary gears share work between multiple gears, making it easy to transfer high amounts of power without putting a lot of stress on the gears. The gears in a planetary gear motor are held together by a movable arm. High-efficiency planetary gear motors are more efficient than traditional gearmotors.
While a planetary gear motor can generate torque, it is more efficient and cheaper to produce. The planetary gear system is designed with all gears operating in synchrony, minimizing the chance of a single gear failure. The efficiency of a planetary gearmotor makes it a popular choice for high-torque applications. This type of motor is suitable for many applications, and is less expensive than a standard geared motor.
The planetary gearbox is a combination of a planetary type gearbox and a DC motor. The planetary gearbox is compact, versatile, and efficient, and can be used in a wide range of industrial environments. The planetary gearbox with an HN210 DC motor is used in a 22mm OD, PPH, and ph configuration with voltage operating between 6V and 24V. It is available in many configurations and can be custom-made to meet your application requirements.
Motor

High cost

In general, planetary gearmotors are more expensive than other configurations of gearmotors. This is due to the complexity of their design, which involves the use of a central sun gear and a set of planetary gears which mesh with each other. The entire assembly is enclosed in a larger internal tooth gear. However, planetary motors are more effective for higher load requirements. The cost of planetary motors varies depending on the number of gears and the number of planetary gears in the system.
If you want to build a planetary gearbox, you can purchase a gearbox for the motor. These gearboxes are often available with several ratios, and you can use any one to create a custom ratio. The cost of a gearbox depends on how much power you want to move with the gearbox, and how much gear ratio you need. You can even contact your local FRC team to purchase a gearbox for the motor.
Gearboxes play a major role in determining the efficiency of a planetary gearmotor. The output shafts used for this type of motor are usually made of steel or nickel-steel, while those used in planetary gearboxes are made from brass or plastic. The former is the most durable and is best for applications that require high torque. The latter, however, is more absorbent and is better at holding lubricant.
Using a planetary gearbox will allow you to reduce the input power required for the stepper motor. However, this is not without its downsides. A planetary gearbox can also be replaced with a spare part. A planetary gearbox is inexpensive, and its spare parts are inexpensive. A planetary gearbox has low cost compared to a planetary motor. Its advantages make it more desirable in certain applications.
Another advantage of a planetary gear unit is the ability to handle ultra-low speeds. Using a planetary gearbox allows stepper motors to avoid resonance zones, which can cause them to crawl. In addition, the planetary gear unit allows for safe and efficient cleaning. So, whether you’re considering a planetary gear unit for a particular application, these gear units can help you get exactly what you need.

China Long Service Life 48V 80zyt Brush Pm DC Planetary Gear Motor Table Fan Motor for Door Opener     brushless motor	China Long Service Life 48V 80zyt Brush Pm DC Planetary Gear Motor Table Fan Motor for Door Opener     brushless motor
editor by CX 2023-03-31

China Air Conditioner Outdoor Fan AC Motor 500 RPM motor armature

Warranty: 3 years
Model Number: 2/4/6Pole
Type: Asynchronous Motor
Frequency: 50/60Hz
Phase: Single-phase
Protect Feature: Totally Enclosed
AC Voltage: 208-230 / 240 V
Efficiency: IE 1, IE1
Product Name: Ac Motor 500 RPM
Application: Air Conditioner Outdoor Fan Motor
Casing Protection: Protection Type
Winding: 100% Copper Wire
Speed: 500RPM
Protection class: B
Housing: <42dB(A)
Model: YYS/YYK/YYW
Certification: CCC, ce, RoHS, VDE, REACH,TUV
Packaging Details: Carton/Pallet/Wooden case
Port: HangZhou/ZheJiang

Our Company About Us    HangZhou City HangZhou Motor Co.,Ltd. located in the hometown of motor — HangZhou China.HangZhou Motor is the leader of household appliance motors . Established in 1999 , HangZhou has been focused on air conditioner motor for 21 years .Now we have about 1000 employees , daily output more than 60,000 units. HangZhou has 50 patents and 90 % motor parts self-made rate. We are the strategic partner of Aux for 20 years and CZPT more than10 years. Our products are exported to more than 20 countries and regions such as the United States, the European Union,theMiddle East and Southeast Asia. “Drive human comfortable life”, we have made major breakthroughs in other household appliances,such as air cooler “Symphony”; fans“SingFun”,”Kadeer”; bath heater Opple, Aupu and so on. “Beyond self to be the leading motor supplier of international well-known brand”. “Made in China” leads the world’s trends, Xihu (West Lake) Dis.Fang always adheres “quality centered, costs leaded, service touched” to do our little bit to “Chinese motor making” in the world. 
Title goes here.Plastic Sealed Motor for Range HoodPlastic Sealed Motor for Air ConditionerPlastic Sealed Motor for Air purifier ,Bath heater And Air VentilationIron (Aluminium) hull Motor,Shaded Pole Motor For Home Appliance

Products Show Product features:Use CZPT low noise high quality rolling bearing.Nickel plating for shaft, electrophoretic coating for enclosure.Reasonable structure, high efficiency, low temperature rise, low noise, small vibration.
Product application:Split air conditioner outdoor unit and fresh air ventilation system; 
Indoor air conditioning unit and other ventilation equipment;
Indoor air conditioning unit and other ventilation equipment;
Fresh air ventilation system, kitchen and bathroom ventilation equipment.
Factory Show Our Certifications Certifications  Our products have CCC,TUV and CE certifications. Our company has ISO9001 and ISO14001 quality management systimes.
Letters Patent  Profession and innovation is our pursuit all the time. We have 12 patents on motors’ appearance design, internal structure, practicability, and plastic sealed motor, aluminium hull motor.
Packing & Delivery FAQ Q: What’s your company’s main products?A: Our company is specialized in motors for air conditioner and other household appliances
Q: What’s the MOQ for your production?A: The MOQ is 1000pcs or depends on your products requirements
Q: Do you provide samples ? is it free or extra ?A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?A: 30% T/T in deposit,the rest against on the copy of B/LIf you have another question, pls feel free to contact us as below:
Q: Is it all right to make customer’s own brand name?A: OEM is ok
Q: Are you a manufactuer or trading company?A: We are a manufactuer Our Service 1. Warranty : 1 year warranty for all products.2. Specializing in AC motor for 16 years3. 100% inspection before final packing.4. OEM: we can make the sample as your sample or design drawing.5. Sample : free of charge when we start to cooperate.Small orders,Mixed orders,Trial orders are accepted . Customers pay the charge of Freight .6.Prompt reply: we can reply your inquiry and email within 24 hours.7. Fast Delivery: The delivery time is 20-30 days (depend on your QTY) after receiving the deposit.

Benefits of a Planetary Motor

Besides being one of the most efficient forms of a drive, a Planetary Motor also offers a great number of other benefits. These features enable it to create a vast range of gear reductions, as well as generate higher torques and torque density. Let’s take a closer look at the benefits this mechanism has to offer. To understand what makes it so appealing, we’ll explore the different types of planetary systems.
Motor

Solar gear

The solar gear on a planetary motor has two distinct advantages. It produces less noise and heat than a helical gear. Its compact footprint also minimizes noise. It can operate at high speeds without sacrificing efficiency. However, it must be maintained with constant care to operate efficiently. Solar gears can be easily damaged by water and other debris. Solar gears on planetary motors may need to be replaced over time.
A planetary gearbox is composed of a sun gear and two or more planetary ring and spur gears. The sun gear is the primary gear and is driven by the input shaft. The other two gears mesh with the sun gear and engage the stationary ring gear. The three gears are held together by a carrier, which sets the spacing. The output shaft then turns the planetary gears. This creates an output shaft that rotates.
Another advantage of planetary gears is that they can transfer higher torques while being compact. These advantages have led to the creation of solar gears. They can reduce the amount of energy consumed and produce more power. They also provide a longer service life. They are an excellent choice for solar-powered vehicles. But they must be installed by a certified solar energy company. And there are other advantages as well. When you install a solar gear on a planetary motor, the energy produced by the sun will be converted to useful energy.
A solar gear on a planetary motor uses a solar gear to transmit torque from the sun to the planet. This system works on the principle that the sun gear rotates at the same rate as the planet gears. The sun gear has a common design modulus of -Ns/Np. Hence, a 24-tooth sun gear equals a 3-1/2 planet gear ratio. When you consider the efficiency of solar gears on planetary motors, you will be able to determine whether the solar gears are more efficient.

Sun gear

The mechanical arrangement of a planetary motor comprises of two components: a ring gear and a sun gear. The ring gear is fixed to the motor’s output shaft, while the sun gear rolls around and orbits around it. The ring gear and sun gear are linked by a planetary carrier, and the torque they produce is distributed across their teeth. The planetary structure arrangement also reduces backlash, and is critical to achieve a quick start and stop cycle.
When the two planetary gears rotate independently, the sun gear will rotate counterclockwise and the ring-gear will turn in the same direction. The ring-gear assembly is mounted in a carrier. The carrier gear and sun gear are connected to each other by a shaft. The planetary gears and sun gear rotate around each other on the ring-gear carrier to reduce the speed of the output shaft. The planetary gear system can be multiplied or staged to obtain a higher reduction ratio.
A planetary gear motor mimics the planetary rotation system. The input shaft turns a central gear, known as the sun gear, while the planetary gears rotate around a stationary sun gear. The motor’s compact design allows it to be easily mounted to a vehicle, and its low weight makes it ideal for small vehicles. In addition to being highly efficient, a planetary gear motor also offers many other benefits.
A planetary gearbox uses a sun gear to provide torque to the other gears. The planet pinions mesh with an internal tooth ring gear to generate rotation. The carrier also acts as a hub between the input gear and output shaft. The output shaft combines these two components, giving a higher torque. There are three types of planetary gearboxes: the sun gear and a wheel drive planetary gearbox.
Motor

Planetary gear

A planetary motor gear works by distributing rotational force along a separating plate and a cylindrical shaft. A shock-absorbing device is included between the separating plate and cylindrical shaft. This depressed portion prevents abrasion wear and foreign particles from entering the device. The separating plate and shaft are positioned coaxially. In this arrangement, the input shaft and output shaft are rotated relative to one another. The rotatable disc absorbs the impact.
Another benefit of a planetary motor gear is its efficiency. Planetary motor gears are highly efficient at transferring power, with 97% of the input energy being transferred to the output. They can also have high gear ratios, and offer low noise and backlash. This design also allows the planetary gearbox to work with electric motors. In addition, planetary gears also have a long service life. The efficiency of planetary gears is due in part to the large number of teeth.
Other benefits of a planetary motor gear include the ease of changing ratios, as well as the reduced safety stock. Unlike other gears, planetary gears don’t require special tools for changing ratios. They are used in numerous industries, and share parts across multiple sizes. This means that they are cost-effective to produce and require less safety stock. They can withstand high shock and wear, and are also compact. If you’re looking for a planetary motor gear, you’ve come to the right place.
The axial end surface of a planetary gear can be worn down by abrasion with a separating plate. In addition, foreign particles may enter the planetary gear device. These particles can damage the gears or even cause noise. As a result, you should check planetary gears for damage and wear. If you’re looking for a gear, make sure it has been thoroughly tested and installed by a professional.

Planetary gearbox

A planetary motor and gearbox are a common combination of electric and mechanical power sources. They share the load of rotation between multiple gear teeth to increase the torque capacity. This design is also more rigid, with low backlash that can be as low as one or two arc minutes. The advantages of a planetary gearmotor over a conventional electric motor include compact size, high efficiency, and less risk of gear failure. Planetary gear motors are also more reliable and durable than conventional electric motors.
A planetary gearbox is designed for a single stage of reduction, or a multiple-stage unit can be built with several individual cartridges. Gear ratios may also be selected according to user preference, either to face mount the output stage or to use a 5mm hex shaft. For multi-stage planetary gearboxes, there are a variety of different options available. These include high-efficiency planetary gearboxes that achieve a 98% efficiency at single reduction. In addition, they are noiseless, and reduce heat loss.
A planetary gearbox may be used to increase torque in a robot or other automated system. There are different types of planetary gear sets available, including gearboxes with sliding or rolling sections. When choosing a planetary gearset, consider the environment and other factors such as backlash, torque, and ratio. There are many advantages to a planetary gearbox and the benefits and drawbacks associated with it.
Planetary gearboxes are similar to those in a solar system. They feature a central sun gear in the middle, two or more outer gears, and a ring gear at the output. The planetary gears rotate in a ring-like structure around a stationary sun gear. When the gears are engaged, they are connected by a carrier that is fixed to the machine’s shaft.
Motor

Planetary gear motor

Planetary gear motors reduce the rotational speed of an armature by one or more times. The reduction ratio depends on the structure of the planetary gear device. The planetary gear device has an output shaft and an armature shaft. A separating plate separates the two. The output shaft moves in a circular pattern to turn the pinion 3. When the pinion rotates to the engagement position, it is engaged with the ring gear 4. The ring gear then transmits the rotational torque to the armature shaft. The result is that the engine cranks up.
Planetary gear motors are cylindrical in shape and are available in various power levels. They are typically made of steel or brass and contain multiple gears that share the load. These motors can handle massive power transfers. The planetary gear drive, on the other hand, requires more components, such as a sun’s gear and multiple planetary gears. Consequently, it may not be suitable for all types of applications. Therefore, the planetary gear drive is generally used for more complex machines.
Brush dusts from the electric motor may enter the planetary gear device and cause it to malfunction. In addition, abrasion wear on the separating plate can affect the gear engagement of the planetary gear device. If this occurs, the gears will not engage properly and may make noise. In order to prevent such a situation from occurring, it is important to regularly inspect planetary gear motors and their abrasion-resistant separating plates.
Planetary gear motors come in many different power levels and sizes. These motors are usually cylindrical in shape and are made of steel, brass, plastic, or a combination of both materials. A planetary gear motor can be used in applications where space is an issue. This motor also allows for low gearings in small spaces. The planetary gearing allows for large amounts of power transfer. The output shaft size is dependent on the gear ratio and the motor speed.

China Air Conditioner Outdoor Fan AC Motor 500 RPM     motor armatureChina Air Conditioner Outdoor Fan AC Motor 500 RPM     motor armature
editor by czh

China 100-240v 35w Ac mini shaded pole motor for Oven fan microwave oven with Hot selling

Warranty: 3months-1year
Model Number: HT-L-498
Type: Asynchronous Motor, AC motor
Frequency: 50/60Hz
Phase: Three-phase
AC Voltage: 220V
Efficiency: IE 1
Voltage: 220V
power: 35w
speed: 1350rpm
Packaging Details: Non-wooden Case or Carton

Specification

itemvalue
Warranty3months-1year
Place of OriginChina
ZheJiang
Brand NameXIHU (WEST LAKE) DIS.
Model NumberHT-L-498
TypeAsynchronous Motor
Frequency50/60Hz
PhaseThree-phase
AC Voltage220V
EfficiencyIE 1
TypeAC motor
Voltage220V
power35w
speed1350rpm

How to Maximize Gear Motor Reliability

A gearmotor is a mechanical device used to transmit torque from one location to another. As its name implies, it is designed to rotate one object relative to another. Its main use is to transmit torque from one point to another. The most common types of gear motors are: worm, spur, and helical. Each of these has specific functions and can be used for a variety of applications. Reliability is also an important factor to consider when choosing a gearmotor.

Applications of a gear motor

Despite its small size, a gear motor has many applications. These include heavy machinery lifts, hospital beds, and power recliners. It is also found in many everyday products, such as electromechanical clocks and cake mixers. Its versatility allows it to produce a high force from a small electric motor. Here are some of its most common uses. You can also find a gear motor in many household appliances and vehicles.
Before selecting a gearmotor, consider the specifications of the machine you need to power. You should consider its size, weight, and ambient conditions, which include temperature regimes, noise levels, and contaminating sources. You should also take into account the envelope size, mounting method, and orientation. Other considerations include the expected service life, maintenance scope, and control type. The most suitable gearmotor for your specific application will be one that can handle the load.
The motor and gearbox types can be mixed and matched, depending on the application. A three-phase asynchronous motor and a permanent magnet synchronous servomotor are common choices for these devices. The type of motor and gearbox combination you choose will determine the power supply, the efficiency of the motor, and cost. Once you understand the application, it will be easy to integrate a gear motor into your system.
When used in industrial applications, gear motors are effective for reducing the speed of rotating shafts. One third of all industrial electric motor systems use gearing to reduce output speed. They can also save energy, which benefits the workers who operate them. In fact, industrial electric motor systems are responsible for nearly one-tenth of the carbon dioxide emissions that are produced by fossil-fueled power plants. Fortunately, efficiency and reliability are just two of the benefits of using gear motors.
Motor

Types

Before choosing a gearmotor, it is important to understand its specifications. The key factors to consider are the size, weight, and noise level of the gearmotor. Additionally, the power, torque, and speed of the motor are important factors. Specifications are also important for its operating environment, such as the temperature and the level of ingress protection. Finally, it is important to determine its duty cycle to ensure it will operate properly. To choose a suitable gearmotor, consult the specifications of your application.
Some common applications of gearmotors include packaging equipment, conveyors, and material handling applications. They also come with several advantages, including their ability to control both position and speed. This makes them ideal for applications where speed and positioning are crucial. Parallel-shaft gear units, for instance, are commonly used in conveyors, material handling, and steel mills. They are also able to operate in high-precision manufacturing. For these reasons, they are the most popular type of gearmotor.
There are three common types of gears. Helical gears have teeth that are inclined at 90 degrees to the axis of rotation, making them more efficient. Helicoidal gears, meanwhile, have a lower noise level and are therefore preferred for applications requiring high torque. Worm gears are preferred for applications where torque and speed reduction are important, and worm gears are suited for those conditions. They also have advantages over spur gears and worm gears.
The application of a gear motor is almost limitless. From heavy machine lifts to hospital bed lifting mechanisms, gear motors make it possible to use a small rotor at a high speed. Their lightweight construction also allows them to move heavy loads, such as cranes, but they do so slowly. Gear motors are an excellent choice in applications where space is an issue. A few common applications are discussed below. When choosing a gear motor, remember to choose the best size and application for your needs.
Motor

Functions

A gearmotor’s speed is directly proportional to the gear ratio. By dividing the input speed by the gear ratio, the output speed can be determined. Gear ratios above one reduce speed, while gear ratios below one increase speed. Efficiency of a gearmotor is defined as its ability to transfer energy through its gearbox. This efficiency factor takes into account losses from friction and slippage. Most gearmotor manufacturers will provide this curve upon request.
There are several factors that must be considered when choosing a gearmotor. First, the application must meet the desired speed and torque. Second, the output shaft must rotate in the desired direction. Third, the load must be properly matched to the gearmotor. Lastly, the operating environment must be considered, including the ambient temperature and the level of protection. These details will help you find the perfect gearmotor. You can compare various types of gear motors on this page and choose the one that will meet your needs.
The micro-DC gear motor is one of the most versatile types of geared motors. These motors are widely used in intelligent automobiles, robotics, logistics, and the smart city. Other applications include precision instruments, personal care tools, and cameras. They are also commonly found in high-end automotives and are used in smart cities. They also find use in many fields including outdoor adventure equipment, photography equipment, and electronics. The benefits of micro-DC gear motors are many.
The main function of a gear motor is to reduce the speed of a rotating shaft. Small electric clocks, for example, use a synchronous motor with a 1,200-rpm output speed to drive the hour, minute, and second hands. While the motor is small, the force it exerts is enormous, so it’s crucial to ensure that the motor isn’t over-powered. There is a high ratio between the input torque and the output torque.

Reliability

The reliability of a gear motor is dependent on a number of factors, including material quality, machining accuracy, and operating conditions. Gear failure is often more serious than surface fatigue, and can compromise personal safety. Reliability is also affected by the conditions of installation, assembly, and usage. The following sections provide an overview of some important factors that impact gear motor reliability. This article provides some tips to maximize gear motor reliability.
First and foremost, make sure you’re buying from a reliable supplier. Gear motors are expensive, and there is no standardization of the sizes. If a gear breaks, replacing it can take a lot of time. In the long run, reliability wins over anything. But this doesn’t mean that you can ignore the importance of gears – the quality of a gear motor is more important than how long it lasts.
Motor

Cost

The cost of a gear motor is relatively low compared to that of other forms of electric motors. This type of motor is commonly used in money counters, printers, smart homes, and automation equipment. A DC gear motor is also commonly used in automatic window machines, glass curtain walls, and banknote vending machines. There are many advantages to using a gear motor. Here are a few of them. Read on to learn more about them.
Speed management is another benefit of a gear motor. The motors tend to have less wear and tear than other motors, which means less frequent replacements. Additionally, many gear motors are easy to install and require less maintenance, which also helps reduce the overall cost of ownership. Lastly, because noise is a common concern for many electronic OEMs, DC gear motors are often quieter than their counterparts. For these reasons, they are often used in industrial settings.
Another advantage of an electric gear motor is its size and power. They are typically designed for 12V, 24V, and 48V voltages and 200-watt power. Their rated speed is 3000 rpm and their torque is 0.64 Nm. They are also more reliable than their AC counterparts and are ideal for many industrial applications. They have a high ratio of three to two, which makes them ideal for a variety of applications.
A gear motor is an electric motor that is coupled with a gear train. It uses AC or DC power, and is often called a gear reducer. The main purpose of these gear reducers is to multiply torque, while maintaining compact size and overall efficiency. However, the efficiency of a gear motor is also affected by ambient temperature and lubricants. If the gear motor is installed in the wrong location, it may be ineffective and result in premature failure of the machine.

China 100-240v 35w Ac mini shaded pole motor for Oven fan microwave oven     with Hot selling	China 100-240v 35w Ac mini shaded pole motor for Oven fan microwave oven     with Hot selling
editor by czh

China high quality 16 Inch Stand Fan Electric Cooling Fan Motor 100V AC With Frequency 50Hz – 60Hz and 1 Year Warranty with Great quality

Warranty: 3months-1year, 12 Months
Model Number: VNSC4-CVC01700
Type: Electric Fan Motor
Frequency: 60Hz
Phase: Single-phase
Protect Feature: Totally Enclosed
AC Voltage: 100V
Efficiency: IE 1
Product Name: VNSC4-CVC01700
Material: Copper wire
Size: 16 Inch
Speed: 3 speeds
Voltage: 100V
Power: 54W
Usage: Stand fan, Wall fan
Brand: Cuong Vinh
Package: 18 pcs
Packaging Details: 18pcs/ctn
Port: CAT LAI PORT/ Ho Chi Minh

Banner Specification

Warranty3months-1year
Place of OriginVietnam
Brand NameCuong Vinh
TypeElectric Fan Motor
Frequency60Hz
PhaseSingle-phase
CertificationRoHS, UL, VDE
Protect FeatureTotally Enclosed
AC Voltage100V
EfficiencyIE 1
Product NameVNSC4-CVC01700
MaterialCopper wire
Size16 Inch
Why Choose Us Company Profile Cuong Vinh Manufacture and Trading Co., Ltd was found in 1995, specializing in manufacturing all kinds of electric motors and electric fan motors. Top company mission is delivering to our clients the safety, quality, execution time and optimal solutions in the field of electrical equipment supply.With more than 25 years of establishment and development, Cuong Vinh invested in building a factory equipped with modern machinery and equipment, with an area of 47,000 m2, to enhance production capacity CZPT over 10 million products per year.Cuong Vinh has successfully applied and operated Quality Management System in accordance to ISO 9001:2015. With the desire to deliver the best products with the most reasonable prices, the Company has always focused on quality improvement and prestige with our clients in the supply and after-sales service.Currently, 65% of company products for export and 35% for domestic market. All the products have also gained both local and foreign clients’ confidence and trust.- In domestic market: Cuong Vinh has supplied motors to a great number of well-known fan producers as follow:The North: Hai Phong Electrical Mechanical JSC, CZPT Electromechanical, Viet Nhat Electric, Hoa Phuong…The Central: Ham Rong, Bang Ngoc, Van Phuong…The South: Bifan, Senko, Midea, Yanfan, Lifan, Onkyo, Co Dien WIN 168…- In international market: our products are exported to over 10 countriesAsia: Philippines, Malaysia, Thailand, Indonesia, India, ZheJiang , Banglades, Myanmar, Jordan, Japan, KoreaAfrica: Nigieria, EgyptAmerica: Cuba, BrazilBeside traditional products including civil and industrial electric fan motors (capacity from 10 Watt to 500 Watt), Cuong Vinh has supplied a wide range of industrial motors (capacity < 500Watt) such as: motors for massage machines, air conditioners, food dryers, shrimp feeders, rolling doorsBeside traditional products including civil and industrial electric fan motors (capacity from 10 Watt to 500 Watt), Cuong Vinh has supplied a wide range of industrial motors (capacity < 500Watt) such as: motors for massage machines, air conditioners, food dryers, shrimp feeders, rolling doors^Cuong Vinh is honoured to own more than 100 engineers and over 900 professionally trained, experienced and long-term workers. In particular, a team of dedicated and professional sales staff always work to meet all the needs of our clients and gain their highest satisfaction, according to the motto of the Company: "Cooperating for Development" Main products FAQ 1. who are we?We are based in Vietnam, start from 2007,sell to Southeast Asia(40.00%),Domestic Market(35.00%),Africa(10.00%),South Asia(10.00%),South America(5.00%). There are total about 501-1000 people in our office.2. how can we guarantee quality?Always a pre-production sample before mass production;Always final Inspection before shipment;3.what can you buy from us?Fan motor,Industrial fan motor,Industrial motor,All kind of motor,electric fan motor4. why should you buy from us not from other suppliers?uong Vinh Manufacture and Trading Co., Ltd was found in 1995, specializing in manufacturing all kinds of electric motors and electric fan motors. Top company mission is delivering to our clients the safety, quality, execution time and optimal solutions.5. what services can we provide?Accepted Delivery Terms: FOB,CIF;Accepted Payment Currency:USD;Accepted Payment Type: T/T;Language Spoken:English,Chinese Main Markets

The Benefits of Using a Gear Motor

A gear motor works on the principle of conservation of angular momentum. As the smaller gear covers more RPM and the larger gear produces more torque, the ratio between the two is greater than one. Similarly, a multiple gear motor follows the principle of energy conservation, with the direction of rotation always opposite to the one that is adjacent to it. It’s easy to understand the concept behind gear motors and the various types available. Read on to learn about the different types of gears and their applications.

Electric motor

The choice of an electric motor for gear motor is largely dependent on the application. There are various motor and gearhead combinations available, and some are more efficient than others. However, it is critical to understand the application requirements and select a motor that meets these needs. In this article, we’ll examine some of the benefits of using a gear motor. The pros and cons of each type are briefly discussed. You can buy new gear motors at competitive prices, but they aren’t the most reliable or durable option for your application.
To determine which motor is best for your application, you’ll need to consider the load and speed requirements. A gear motor’s efficiency (e) can be calculated by taking the input and output values and calculating their relation. On the graph below, the input (T) and output (P) values are represented as dashed lines. The input (I) value is represented as the torque applied to the motor shaft. The output (P) is the amount of mechanical energy converted. A DC gear motor is 70% efficient at 3.75 lb-in / 2,100 rpm.
In addition to the worm gear motor, you can also choose a compact DC worm gear motor with a variable gear ratio from 7.5 to 80. It has a range of options and can be custom-made for your specific application. The 3-phase AC gear motor, on the other hand, works at a rated power of one hp and torque of 1.143.2 kg-m. The output voltage is typically 220V.
Another important factor is the output shaft orientation. There are two main orientations for gearmotors: in-line and offset. In-line output shafts are most ideal for applications with high torque and short reduction ratios. If you want to avoid backlash, choose a right angle output shaft. An offset shaft can cause the output shaft to become excessively hot. If the output shaft is angled at a certain angle, it may be too large or too small.
Motor

Gear reducer

A gear reducer is a special kind of speed reducing motor, usually used in large machinery, such as compressors. These reducers have no cooling fan and are not designed to handle heavy loads. Different purposes require different service factors. For instance, a machine that requires frequent fast accelerations and occasional load spikes needs a gear reducer with a high service factor. A gear reducer that’s designed for long production shifts should be larger than a machine that uses it for short periods of time.
A gear reducer can reduce the speed of a motor by a factor of two. The reduction ratio changes the rotation speed of the receiving member. This change in speed is often required to solve problems of inertia mismatch. The torque density of a gear reducer is measured in newton meters and will depend on the motor used. The first criterion is the configuration of the input and output shafts. A gear ratio of 2:1, for example, means that the output speed has been cut in half.
Bevel gear reducers are a good option if the input and output shafts are perpendicular. This type is very robust and is perfect for situations where the angle between two axes is small. However, bevel gear reducers are expensive and require constant maintenance. They are usually used in heavy-duty conveyors and farm equipment. The correct choice of gear reducer for gear motor is crucial for the efficiency and reliability of the mechanism. To get the best gear reducer for your application, talk to a qualified manufacturer today.
Choosing a gear reducer for a gear motor can be tricky. The wrong one can ruin an entire machine, so it’s important to know the specifics. You must know the torque and speed requirements and choose a motor with the appropriate ratio. A gear reducer should also be compatible with the motor it’s intended for. In some cases, a smaller motor with a gear reducer will work better than a larger one.
Motor

Motor shaft

Proper alignment of the motor shaft can greatly improve the performance and life span of rotating devices. The proper alignment of motors and driven instruments enhances the transfer of energy from the motor to the instrument. Incorrect alignment leads to additional noise and vibration. It may also lead to premature failure of couplings and bearings. Misalignment also results in increased shaft and coupling temperatures. Hence, proper alignment is critical to improve the efficiency of the driven instrument.
When choosing the correct type of gear train for your motor, you need to consider its energy efficiency and the torque it can handle. A helical geared motor is more efficient for high output torque applications. Depending on the required speed and torque, you can choose between an in-line and a parallel helical geared motor. Both types of gears have their advantages and disadvantages. Spur gears are widespread. They are toothed and run parallel to the motor shaft.
A planetary gear motor can also have a linear output shaft. A stepping motor should not operate at too high current to prevent demagnetization, which will lead to step loss or torque drop. Ensure that the motor and gearbox output shafts are protected from external impacts. If the motor and gearbox are not protected against bumps, they may cause thread defects. Make sure that the motor shafts and rotors are protected from external impacts.
When choosing a metal for your gear motor’s motor shaft, you should consider the cost of hot-rolled bar stock. Its outer layers are more difficult to machine. This type of material contains residual stresses and other problems that make it difficult to machine. For these applications, you should choose a high-strength steel with hard outer layers. This type of steel is cheaper, but it also has size considerations. It’s best to test each material first to determine which one suits your needs.
In addition to reducing the speed of your device, a geared motor also minimizes the torque generated by your machine. It can be used with both AC and DC power. A high-quality gear motor is vital for stirring mechanisms and conveyor belts. However, you should choose a geared motor that uses high-grade gears and provides maximum efficiency. There are many types of planetary gear motors and gears on the market, and it’s important to choose the right one.
Motor

First stage gears

The first stage gears of a gear motor are the most important components of the entire device. The motor’s power transmission is 90% efficient, but there are many factors that can affect its performance. The gear ratios used should be high enough to handle the load, but not too high that they are limiting the motor’s speed. A gear motor should also have a healthy safety factor, and the lubricant must be sufficient to overcome any of these factors.
The transmission torque of the gear changes with its speed. The transmission torque at the input side of the gear decreases, transferring a small torque to the output side. The number of teeth and the pitch circle diameters can be used to calculate the torque. The first stage gears of gear motors can be categorized as spur gears, helical gears, or worm gears. These three types of gears have different torque capacities.
The first stage helical gear is the most important part of a gear motor. Its function is to transfer rotation from one gear to the other. Its output is the gearhead. The second stage gears are connected by a carrier. They work in tandem with the first stage gear to provide the output of the gearhead. Moreover, the first stage carrier rotates in the same direction as the input pinion.
Another important component is the output torque of the gearmotor. When choosing a gearmotor, consider the starting torque, running torque, output speed, overhung and shock loads, duty cycles, and more. It is crucial to choose a gearmotor with the right ratio for the application. By choosing the proper gearmotor, you will get maximum performance with minimal operating costs and increase plant productivity. For more information on first stage gears, check out our blog.
The first stage of a gear motor is composed of a set of fixed and rotating sprockets. The first stage of these gears acts as a drive gear. Its rotational mass is a limiting factor for torque. The second stage consists of a rotating shaft. This shaft rotates in the direction of the torque axis. It is also the limiting force for the motor’s torque.

China high quality 16 Inch Stand Fan Electric Cooling Fan Motor 100V AC With Frequency 50Hz – 60Hz and 1 Year Warranty     with Great qualityChina high quality 16 Inch Stand Fan Electric Cooling Fan Motor 100V AC With Frequency 50Hz – 60Hz and 1 Year Warranty     with Great quality
editor by czh

China factory High Speed 140 mini DC brush motor 3V factory price fan motor small round DC motors R140 RE-140 near me manufacturer

Model Number: KRE-140
Warranty: 3months-1year
Type: brush, Micro Motor
Customized: Yes
Rated Speed (r/min): 6000rpm
Rated Power: 0.06
Nominal Voltage: 6v
Application: toy
Number of Poles: 3
Usage: Home Appliance
Certification: RoHS, rosh
Commutation: Brush
Protect Feature: Totally Enclosed
Efficiency: IE 1
Packaging Details: Standard carton,1000pcs/carton.Can be customized per requirements.
Port: HangZhou/Hongkong

Electric shaver hair clipper home appliance small micro motor rf rc 300 dc motorKRF-300 12v electric motor , High Speed Vibration Motor for Fan Motor 3.3V DVD Player Motor Volt1.9vNo Load Speed3500rpmRated Speed2740rpmRated Torque3.9g.cmApplicationRobot , door lock , toy, cabinet lock,Fan, DVD Player SPECIFICATION:1. Voltage: DC 2.4V2. No load speed: 8300±10%rpm3. No load current: 0.016A4. Diameter 20mm, length 32mm, shaft dia 2.0mm5. Material: plastic gear and metal DC motor6. Weight: 32g Approx7. Application:Robot, Bike lock, Home Appliance, Door Lock etc8. Customized,Adjust the performance at free(voltage, speed, torque)

  • Kegu Motor Provide intelligent lock solution
  • Special imported steel for gear material, minimum modulus (0.15 mode), ultra-low noise, high reliability.The motor adopts highanti-oxidation commutator and brush material, which hasthe characteristics of smooth operation, long life and small vibration. * High Torque * Low Noise * Longer life time up to 200,000 times unlock Detailed Images This series of motors are used in intelligent switch, smart door lock, fingerprint lock driver.180 DC motor, 180 vibration motor Size Information Drawing of KRF-300 24mm DC motor Full range of precision gearbox, diameters 6mm,8mm,10mm,12mm,13mm,16mm,20mm,22mm,24mm,28mm,32mm,36mm,37mm,42mm,48mm, output speed 5-3000rpm,reduction ratio 5-1500, output torque 1g.cm to 50kg.cm Packing&Shipping After Sales Service The reliability and stability of the product is an important index to evaluate the technical level of the product.In order to accurately analyze, evaluate and verify the performance of the product. So Kegu motor will reply customer in 2 days after receivecomplain from customer. Engineer team analyze the reasons according to customer complain and evaluate manufacturing process.After confirm the motor issue,customer can return defect motor, we will ship out all motors after repair motors. Company Introduction Shen Zhen Ke Gu Technology Co.,Ltd, it is a high-tech private enterprise integrating research, development, production and sales of various types of miniature DC motors, precision gearbox, micro transmission of system. We also provide the drive solutions for customers from design, components manufacturing and assembly.The company strictly implements the IS9001:2015 management system. Products are widely used in automotive,communications equipment,smart home,medical equipment, intelligent security,household appliances,western kitchen equipment,machinery and electronics and other high-end transmission structures,products are exported to more than 50 countries and regions at home and abroad. Our Services & Strength R&D team is committed to designing and developing micro drive systems for many years and providing drive system solutions for customers.Provide customized, design, development, production and assembly services of micro gear transmission system. Certifications FAQ Q:1.What kind of motors you can provide?A:Full range of precision gearbox, diameters 6mm,8mm,10mm,12mm,13mm,16mm,20mm,22mm,24mm,28mm,32mm,36mm,37mm,42mm,48mm, output speed 5-3000rpm,reduction ratio 5-1500, output torque 1g.cm to 50kg.cmQ:2. Can you send me a price list?A: For all of our motors, they are customized based on different requirements like lifetime, noise, voltage, and shaft etc. The price also varies according to annual quantity. So it’s really difficult for us to provide a price list. If you can share yourdetailed requirements and annual quantity, we’ll see what offer we can provide.Q:3. What’s the lead time for regular order?A: For orders, the standard lead time is 25-40 days and this time can be shorter or longer based on different model, period and quantity.Q:4. Is it possible for you to develop new motors if we can provide tooling cost?A: Yes. Please kindly share the detailed requirements like performance, size, annual quantity, target price etc. Then we’ll make our evaluation to see if we can arrange or not.Q:5. Can I get some samples?A: It depends. If only a few samples for personal use or replacement, I am afraid it’ll be difficult for us to provide because all of our motors are custom made and no stock available if there is no further needs. If just sample testing before the official order and our MOQ, price and other terms are acceptable, we’d love to provide samples.

    The Basics of a Planetary Motor

    A Planetary Motor is a type of gearmotor that uses multiple planetary gears to deliver torque. This system minimizes the chances of failure of individual gears and increases output capacity. Compared to the planetary motor, the spur gear motor is less complex and less expensive. However, a spur gear motor is generally more suitable for applications requiring low torque. This is because each gear is responsible for the entire load, limiting its torque.

    Self-centering planetary gears

    This self-centering mechanism for a planetary motor is based on a helical arrangement. The helical structure involves a sun-planet, with its crown and slope modified. The gears are mounted on a ring and share the load evenly. The helical arrangement can be either self-centering or self-resonant. This method is suited for both applications.
    A helical planetary gear transmission is illustrated in FIG. 1. A helical configuration includes an output shaft 18 and a sun gear 18. The drive shaft extends through an opening in the cover to engage drive pins on the planet carriers. The drive shaft of the planetary gears can be fixed to the helical arrangement or can be removable. The transmission system is symmetrical, allowing the output shaft of the planetary motor to rotate radially in response to the forces acting on the planet gears.
    A flexible pin can improve load sharing. This modification may decrease the face load distribution, but increases the (K_Hbeta) parameter. This effect affects the gear rating and life. It is important to understand the effects of flexible pins. It is worth noting that there are several other disadvantages of flexible pins in helical PGSs. The benefits of flexible pins are discussed below.
    Using self-centering planetary gears for a helical planetary motor is essential for symmetrical force distribution. These gears ensure the symmetry of force distribution. They can also be used for self-centering applications. Self-centering planetary gears also guarantee the proper force distribution. They are used to drive a planetary motor. The gearhead is made of a ring gear, and the output shaft is supported by two ball bearings. Self-centering planetary gears can handle a high torque input, and can be suited for many applications.
    To solve for a planetary gear mechanism, you need to find its pitch curve. The first step is to find the radius of the internal gear ring. A noncircular planetary gear mechanism should be able to satisfy constraints that can be complex and nonlinear. Using a computer, you can solve for these constraints by analyzing the profile of the planetary wheel’s tooth curve.
    Motor

    High torque

    Compared to the conventional planetary motors, high-torque planetary motors have a higher output torque and better transmission efficiency. The high-torque planetary motors are designed to withstand large loads and are used in many types of applications, such as medical equipment and miniature consumer electronics. Their compact design makes them suitable for small space-saving applications. In addition, these motors are designed for high-speed operation.
    They come with a variety of shaft configurations and have a wide range of price-performance ratios. The FAULHABER planetary gearboxes are made of plastic, resulting in a good price-performance ratio. In addition, plastic input stage gears are used in applications requiring high torques, and steel input stage gears are available for higher speeds. For difficult operating conditions, modified lubrication is available.
    Various planetary gear motors are available in different sizes and power levels. Generally, planetary gear motors are made of steel, brass, or plastic, though some use plastic for their gears. Steel-cut gears are the most durable, and are ideal for applications that require a high amount of torque. Similarly, nickel-steel gears are more lubricated and can withstand a high amount of wear.
    The output torque of a high-torque planetary gearbox depends on its rated input speed. Industrial-grade high-torque planetary gearboxes are capable of up to 18000 RPM. Their output torque is not higher than 2000 nm. They are also used in machines where a planet is decelerating. Their working temperature ranges between 25 and 100 degrees Celsius. For best results, it is best to choose the right size for the application.
    A high-torque planetary gearbox is the most suitable type of high-torque planetary motor. It is important to determine the deceleration ratio before buying one. If there is no product catalog that matches your servo motor, consider buying a close-fitting high-torque planetary gearbox. There are also high-torque planetary gearboxes available for custom-made applications.
    Motor

    High efficiency

    A planetary gearbox is a type of mechanical device that is used for high-torque transmission. This gearbox is made of multiple pairs of gears. Large gears on the output shaft mesh with small gears on the input shaft. The ratio between the big and small gear teeth determines the transmittable torque. High-efficiency planetary gearheads are available for linear motion, axial loads, and sterilizable applications.
    The AG2400 high-end gear unit series is ideally matched to Beckhoff’s extensive line of servomotors and gearboxes. Its single-stage and multi-stage transmission ratios are highly flexible and can be matched to different robot types. Its modified lubrication helps it operate in difficult operating conditions. These high-performance gear units are available in a wide range of sizes.
    A planetary gear motor can be made of steel, nickel-steel, or brass. In addition to steel, some models use plastic. The planetary gears share work between multiple gears, making it easy to transfer high amounts of power without putting a lot of stress on the gears. The gears in a planetary gear motor are held together by a movable arm. High-efficiency planetary gear motors are more efficient than traditional gearmotors.
    While a planetary gear motor can generate torque, it is more efficient and cheaper to produce. The planetary gear system is designed with all gears operating in synchrony, minimizing the chance of a single gear failure. The efficiency of a planetary gearmotor makes it a popular choice for high-torque applications. This type of motor is suitable for many applications, and is less expensive than a standard geared motor.
    The planetary gearbox is a combination of a planetary type gearbox and a DC motor. The planetary gearbox is compact, versatile, and efficient, and can be used in a wide range of industrial environments. The planetary gearbox with an HN210 DC motor is used in a 22mm OD, PPH, and ph configuration with voltage operating between 6V and 24V. It is available in many configurations and can be custom-made to meet your application requirements.
    Motor

    High cost

    In general, planetary gearmotors are more expensive than other configurations of gearmotors. This is due to the complexity of their design, which involves the use of a central sun gear and a set of planetary gears which mesh with each other. The entire assembly is enclosed in a larger internal tooth gear. However, planetary motors are more effective for higher load requirements. The cost of planetary motors varies depending on the number of gears and the number of planetary gears in the system.
    If you want to build a planetary gearbox, you can purchase a gearbox for the motor. These gearboxes are often available with several ratios, and you can use any one to create a custom ratio. The cost of a gearbox depends on how much power you want to move with the gearbox, and how much gear ratio you need. You can even contact your local FRC team to purchase a gearbox for the motor.
    Gearboxes play a major role in determining the efficiency of a planetary gearmotor. The output shafts used for this type of motor are usually made of steel or nickel-steel, while those used in planetary gearboxes are made from brass or plastic. The former is the most durable and is best for applications that require high torque. The latter, however, is more absorbent and is better at holding lubricant.
    Using a planetary gearbox will allow you to reduce the input power required for the stepper motor. However, this is not without its downsides. A planetary gearbox can also be replaced with a spare part. A planetary gearbox is inexpensive, and its spare parts are inexpensive. A planetary gearbox has low cost compared to a planetary motor. Its advantages make it more desirable in certain applications.
    Another advantage of a planetary gear unit is the ability to handle ultra-low speeds. Using a planetary gearbox allows stepper motors to avoid resonance zones, which can cause them to crawl. In addition, the planetary gear unit allows for safe and efficient cleaning. So, whether you’re considering a planetary gear unit for a particular application, these gear units can help you get exactly what you need.

    China factory High Speed 140 mini DC brush motor 3V factory price fan motor small round DC motors R140 RE-140  near me manufacturer China factory High Speed 140 mini DC brush motor 3V factory price fan motor small round DC motors R140 RE-140  near me manufacturer