China OEM CHINAMFG High Torque Servo Motor 1004f 1005f 1007f 1008f 1010f 1013f 1315f 1320f 1325f 1330f with Great quality

Product Description

 

Product Description

Albert high torque servo motor 1004F 1005F 1007F 1008F 1571F 1013F 1315F 1320F 1325F 1330F

Why need servo control system:
When using a hydraulic system, the power consumption is more than 75% of the whole injection system. Different pressures and flows are requireed during the process, including mold closing, injection, holding pressure and mold opending. When the flow and pressure requirements exceed the settings, the relief or proportional valve will be adjusted, resulting in a 40%-75% higher power consumption.

The servo control system advantages:

1. Ultra energy saving:
    Save up to 60% compared traditional injection molding machine(60%) fixed displacement
    depend on the different injection conditions, can save up to 80% at the most.
2. Low system temperature
    decrease system temparature by 5-10°C to save cooling costs.
3. Highly accurate repeatability
    result in accurate control of flow and pressure
4. Long pressure holding time: benifit to thick product manufacture
5. Good frequency response rate: up to 50 ms

Detailed Photos

Configurations

 

NVICKS standard configurations:

Pump displacement mL/r

Pressure
Mpa

Max Speed r/min

CHINAMFG pump Model

CHINAMFG servo driver

Phase Servo Motor

Pump Stand shaft Coupling

Pressure Sensor

Proportion Valve

Signal Coverting Board

32

14

2000

QT42-31.5

VFD110VL43A-J 11KW

1005F17.3 10KW

BTJ-01

Italy GEFRAN

03 small size

0-1A to 0-10V

40

14

2000

QT42-40

VFD150VL43B-J 15KW

1007F17.3 14KW

BTJ-01

Italy GEFRAN

03 small size

0-1A to 0-10V

50

14

2000

QT52-50

VFD185VL43B-J 18.5KW

1008F17.3 17.6KW

BTJ-02

Italy GEFRAN

03 small size

0-1A to 0-10V

63

14

2000

QT52-63

VFD220VL43B-J 22KW

1571F15.3 20KW

BTJ-02

Italy GEFRAN

03 small size

0-1A to 0-10V

80

14

2000

QT62-80

VFD300VL43B-J 30KW

1013F17.3 28.7KW

BTJ-06

Italy GEFRAN

06 Big size

0-1A to 0-10V

100

14

2000

QT62-100

VFD370VL43B-J 37KW

1315F15.3 29KW

BTJ-06

Italy GEFRAN

06 Big size

0-1A to 0-10V

125

14

2000

QT62-125

VFD450VL43B-J 45KW

1320F17.3 39.4KW

BTJ-07

Italy GEFRAN

06 Big size

0-1A to 0-10V

 

For bigger pressure requirements, pls contact us for the matched configurations!

Technical data

Product Parameters

 

Applications

Cooperation clients

Our Advantages

 

1. Top Quality
Depend on 15 years experience at pumps design and manufacturing, we have a top quality compared with domestic and overseas manufacturers, all of our products are with 1 year warranty time.

2. Strict Quality Control System
We have the most strict quality control system, all of our products are 100% tested before shipment and each of them has 1 tracking code in order to make sure they are with good quality to our customers.

3. Advanced machinery equipment
All the machines are new CNC machines we imported from Germany and Japan in order to reach more higher demand at the products accuracy.

4. Strong Technical team
Our technical team all have more than 20 years experience at pumps design and engineering, our chief engineer has more than 40 years experience at pumps design. We have 1 15 persons research team, responsible for pumps improvement research and new products development.

5. Competitive Price
Because of good management, our price is more competitive than the original products, more reasonable than most of the domestic suppliers.

6. Fast Delivery time
We can ship small orders within 1 week, for big orders such as within 100 sets of servo systemsusually we can make shipment within 1 month.

7. Warranty Period
All of our products are within 1 year warranty period after the shipment from our factory.

8. Considerate Service
We can provide technical support at any time if our customers meet any issue during the using, we will provide solutions at the soonest time.

9. Long development strategy
We would like to establish a long time strategy cooperation relationship with our customers, to promote Albert brand together, support and train the potential customer to be our agent at each country and region all over the world.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial
Speed: High Speed
Number of Stator: Three-Phase
Function: Control
Casing Protection: Protection Type
Number of Poles: 4
Samples:
US$ 700/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

servo motor

What maintenance practices are recommended for ensuring the longevity of servo motors?

Maintaining servo motors properly is crucial to ensure their longevity and reliable performance. Here are some recommended maintenance practices:

1. Regular Cleaning:

Regularly clean the servo motor to remove dust, debris, and other contaminants that can affect its performance. Use a soft brush or compressed air to clean the motor’s exterior and ventilation ports. Avoid using excessive force or liquid cleaners that could damage the motor.

2. Lubrication:

Follow the manufacturer’s recommendations for lubrication intervals and use the appropriate lubricant for the motor. Lubricate the motor’s bearings, gears, and other moving parts as per the specified schedule. Proper lubrication reduces friction, minimizes wear, and helps maintain optimal performance.

3. Inspections:

Regularly inspect the servo motor for signs of wear, damage, or loose connections. Check for any unusual noises, vibrations, or overheating during operation, as these can indicate potential issues. If any abnormalities are detected, consult the manufacturer’s documentation or seek professional assistance for further evaluation and repair.

4. Electrical Connections:

Ensure that all electrical connections to the servo motor, such as power cables and signal wires, are secure and properly insulated. Loose or damaged connections can lead to electrical problems, voltage fluctuations, or signal interference, which can affect the motor’s performance and longevity.

5. Environmental Considerations:

Take into account the operating environment of the servo motor. Ensure that the motor is protected from excessive moisture, dust, extreme temperatures, and corrosive substances. If necessary, use appropriate enclosures or protective measures to safeguard the motor from adverse environmental conditions.

6. Software and Firmware Updates:

Stay updated with the latest software and firmware releases provided by the servo motor manufacturer. These updates often include bug fixes, performance enhancements, and new features that can improve the motor’s functionality and reliability. Follow the manufacturer’s instructions for safely updating the motor’s software or firmware.

7. Training and Documentation:

Ensure that personnel responsible for the maintenance of servo motors are properly trained and familiar with the manufacturer’s guidelines and documentation. This includes understanding recommended maintenance procedures, safety precautions, and troubleshooting techniques. Regular training and access to up-to-date documentation are essential for effective servo motor maintenance.

8. Professional Servicing:

If a servo motor requires complex repairs or servicing beyond regular maintenance, it is advisable to consult a qualified technician or contact the manufacturer’s service center. Attempting to repair or modify the motor without proper expertise can lead to further damage or safety hazards.

By following these maintenance practices, servo motors can operate optimally and have an extended lifespan. Regular cleaning, lubrication, inspections, secure electrical connections, environmental considerations, software updates, training, and professional servicing all contribute to ensuring the longevity and reliable performance of servo motors.

servo motor

What factors should be considered when selecting a servo motor for a specific application?

When selecting a servo motor for a specific application, several factors need to be considered. These factors help ensure that the chosen servo motor meets the requirements and performs optimally in the intended application. Here are some key factors to consider:

1. Torque and Power Requirements:

One of the primary considerations is the torque and power requirements of the application. The servo motor should be able to generate sufficient torque to handle the load and overcome any resistance or friction in the system. Additionally, the power rating of the motor should match the power supply available in the application. It is essential to evaluate the torque-speed characteristics of the servo motor to ensure it can deliver the required performance.

2. Speed and Acceleration:

The required speed and acceleration capabilities of the servo motor should align with the application’s needs. Different applications have varying speed and acceleration requirements, and the servo motor should be able to meet these demands. It is crucial to consider both the maximum speed that the motor can achieve and the time it takes to accelerate or decelerate to specific speeds. Evaluating the servo motor’s speed-torque characteristics and acceleration capabilities is necessary for selecting the right motor.

3. Positioning Accuracy and Repeatability:

The desired positioning accuracy and repeatability of the application play a significant role in servo motor selection. If precise positioning is crucial, a servo motor with high accuracy and low positioning errors should be chosen. The feedback mechanism, such as encoders or resolvers, should provide the required resolution to achieve the desired accuracy. Repeatability, the ability to consistently reach the same position, should also be considered, especially in applications where repetitive movements are necessary.

4. Environmental Conditions:

The environmental conditions in which the servo motor will operate should be taken into account. Factors such as temperature extremes, humidity, dust, and vibration can affect the motor’s performance and lifespan. In harsh environments, it may be necessary to choose a servo motor with appropriate protection ratings, such as IP (Ingress Protection) ratings, to ensure reliable operation and longevity.

5. Control System Compatibility:

The compatibility of the servo motor with the control system used in the application is crucial. The motor should be compatible with the control signals and communication protocols employed in the system. This includes considerations such as voltage compatibility, control signal types (analog, digital, pulse), and communication interfaces (such as Ethernet, CAN, or Modbus). Ensuring compatibility will facilitate seamless integration and efficient control of the servo motor within the application.

6. Size and Weight Constraints:

The physical size and weight limitations of the application should be considered when selecting a servo motor. The motor’s dimensions should fit within the available space, and its weight should not exceed the application’s weight capacity. Compact and lightweight servo motors may be preferred in applications where space is limited or weight is a critical factor.

7. Cost Considerations:

The cost of the servo motor and its overall value for the application should be evaluated. It is essential to consider the initial purchase cost as well as the long-term maintenance and operational costs. While cost is a factor, it should not be the sole determining factor, as compromising on quality or performance may lead to suboptimal results.

By considering these factors, one can make an informed decision when selecting a servo motor for a specific application. It is recommended to consult with manufacturers or experts in the field to ensure the chosen servo motor meets the application’s requirements and provides reliable and efficient performance.

servo motor

In which industries are servo motors commonly used, and what applications do they serve?

Servo motors are widely used across various industries due to their precise control capabilities and ability to deliver high torque at different speeds. Here are some industries where servo motors are commonly employed, along with their applications:

1. Robotics:

Servo motors are extensively used in robotics to control the movement of robotic limbs and joints. They enable precise positioning and accurate control, allowing robots to perform tasks with high accuracy and repeatability. Servo motors are also employed in humanoid robots, industrial manipulators, and collaborative robots (cobots).

2. Manufacturing and Automation:

In manufacturing and automation industries, servo motors are used in various applications such as conveyor systems, pick-and-place machines, packaging equipment, and assembly lines. Servo motors provide precise control over the movement of components, ensuring accurate positioning, fast response times, and high throughput.

3. CNC Machining:

Servo motors play a vital role in computer numerical control (CNC) machines, where they control the movement of axes (e.g., X, Y, and Z). These motors enable precise and smooth motion, allowing CNC machines to accurately shape and cut materials such as metal, wood, and plastics. Servo motors are also used in CNC routers, milling machines, lathes, and laser cutting equipment.

4. Aerospace and Aviation:

Servo motors find applications in the aerospace and aviation industries, particularly in flight control systems. They are used to control the movement of aircraft surfaces, such as ailerons, elevators, rudders, and flaps. Servo motors ensure precise and responsive control, contributing to the stability and maneuverability of aircraft.

5. Medical Devices:

In the medical field, servo motors are used in various devices and equipment. They are employed in robotic surgery systems, prosthetics, exoskeletons, infusion pumps, diagnostic equipment, and laboratory automation. Servo motors enable precise and controlled movements required for surgical procedures, rehabilitation, and diagnostic tests.

6. Automotive:

Servo motors have several applications in the automotive industry. They are used in electric power steering systems, throttle control, braking systems, and active suspension systems. Servo motors provide accurate control over steering, acceleration, and braking, enhancing vehicle safety and performance.

7. Entertainment and Motion Control:

Servo motors are widely used in the entertainment industry for animatronics, special effects, and motion control systems. They enable realistic movements of animatronic characters, robotic props, and camera rigs in film, television, and theme park attractions. Servo motors also find applications in motion simulators, gaming peripherals, and virtual reality systems.

In addition to these industries, servo motors are utilized in various other fields, including industrial automation, renewable energy systems, textile machinery, printing and packaging, and scientific research.

Overall, servo motors are versatile components that find widespread use in industries requiring precise motion control, accurate positioning, and high torque output. Their applications span across robotics, manufacturing, CNC machining, aerospace, medical devices, automotive, entertainment, and numerous other sectors.

China OEM CHINAMFG High Torque Servo Motor 1004f 1005f 1007f 1008f 1010f 1013f 1315f 1320f 1325f 1330f   with Great quality China OEM CHINAMFG High Torque Servo Motor 1004f 1005f 1007f 1008f 1010f 1013f 1315f 1320f 1325f 1330f   with Great quality
editor by CX 2024-02-12