China Best Sales 22mm Pm DC Planetary Transmission Gear Motor vacuum pump oil

Product Description

22JX5K/22ZY38B

22mm OD Planetary Gearbox,Permissible Load Range: 0.05N.m-0.5N.m

Motor Technical Data

.

TYPE

Ra ted voltage
voe
No- load speed
r/min
No- load current mA Rated speed
r/min
Rated torque
mN.m
Output power
w
Rated current
mA
Stall torque
mN.m
Stall current
A
22ZY38B-1245 12 4500 85 3340 3 1.0 180 13.2 0.48
22ZY38B-1260 12 6000 100 5000 3 1.56 250 15 0.87

Gear Motor technical Data
22ZY38B-1245 DC Motor

    Reduction ratio 3.7 5.2 14 19 27 51 71 100 139 189 264 369 516
    Number of gear trains 1 1 2 2 2 3 3 3 3 4 4 4 4
(L)  Length(L)         mm 24.4 24.4 26.8 26.8 26.8 31.7 31.7 31.7 31.7 36.6 36.6 36.6 36.6
    No- load speed  r/m n 1213 869 321 237 167 88 63 45 32 24 17 12 8.7
    Rated speed      r/min 900 645 239 176 124 65 47 33 24 18 13 9.1 6.5
    Rated torque      N.m 0.571 0.014 0.034 0.046 0.066 0.11 0.16 0.22 0.30 0.37 0.5 0.5 0.5
      N.m
Max. permissible load in a short time
0.15 0.15 0.6 0.6 0.6 1.2 1.2 1.2 1.2 1.5 1.5 1.5 1.5

22ZY38B-1260 DC Motor

      Reduction ratio 3.7 5.2 14 19 27 51 71 100 139 189 264 369 516
    Numberof gear trains 1 1 2 2 2 3 3 3 3 4 4 4 4
(L)  Length(L)         mm 24.4 24.4 26.8 26.8 26.8 31.7 31.7 31.7 31.7 36.6 36.6 36.6 36.6
   No- load speed r/min 1617 1158 429 316 222 118 85 60 43 32 23 16 12
    Rat ed speed r/m n 1348 965 357 263 185 98 70 50 36 26 19 14 9.7
    Rat ed torque N.m 0.571 0.014 0.034 0.046 0.066 0.11 0.16 0.22 0.30 0.37 0.5 0.5 0.5
           N.m
Max. permissible load 1n a short time
0.15 0.15 0.6 0.6 0.6 1.2 1.2 1.2 1.2 1.5 1.5 1.5 1.5

 

Dimensions (mm) Rated Voltage         (VDC) Rated Speed   
  ( r/min )
Reduction Ratio Rated Torgue          (N.m)
22 12 2200-8700 1:3.7-1:516 0.011-1.0
24 12 3600-8700 1:3.7-1:516 0.034-1.0
28 12~24 3800-5100 1:3.7-1:516 0.571-3.0
32 12~24 3800-5100 1:3.7-1:720 0.030-3.0
36 12~24 2400-4300 1:3.7-1:720 0.017-3.0
42 12~24 3400-6500 1:3.5-1:294 0.014-15.0
45 12~24 2400-3600 1:3.71-1:369 0.15-10.0
52 12~24 2400-3600 1:4.5-1:312 0.30-20.0
56 12~24 1600-4000 1:3.6-1:575 0.22-30.0
71 12~24 1600-2600 1:4-1:308 0.72-54.0
82 12~24 1700-2750 1:4-1:329 1.2-120.0
92 12~24 960-2400 1:4.3-1:422 0.9-450.0
120 12~24 1600-2800 1:4.8-1:427 3.4-600.0

Features:
The planetary gearbox for transmission is widely matched with DC motor and BLDC motor. It shows the characters of high torque and controlablity as well as the high lasting torque. The perfect combination fully expresses the product’s smaller and high torque.

Packaging & Shipping:
1, Waterproof plastic bag packed in foam box and carton as outer packing.
2, Export wooden box packaging for products.

WHY CHOOSING US:

  • Open for general discussion and questions
  • Time to market or theatre of operations can be substantially reduced
  • Talented team of engineers providing innovative technical solutions
  • One stop “supplier” and complete sub-system
  • Quality products provided at competitive low cost
  • Ability to ship world wide
  • On time delivery
  • Training at Customer locations
  • Fast service on return and repair results
  • Many repeated customers

 

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Constant Speed
Excitation Mode: Excited
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

gear motor

Are there innovations or emerging technologies in the field of gear motor design?

Yes, there are several innovations and emerging technologies in the field of gear motor design. These advancements aim to improve the performance, efficiency, compactness, and reliability of gear motors. Here are some notable innovations and emerging technologies in gear motor design:

1. Miniaturization and Compact Design:

Advancements in manufacturing techniques and materials have enabled the miniaturization of gear motors without compromising their performance. Gear motors with compact designs are highly sought after in applications where space is limited, such as robotics, medical devices, and consumer electronics. Innovative approaches like micro-gear motors and integrated motor-gear units are being developed to achieve smaller form factors while maintaining high torque and efficiency.

2. High-Efficiency Gearing:

New gear designs focus on improving efficiency by reducing friction and mechanical losses. Advanced gear manufacturing techniques, such as precision machining and 3D printing, allow for the creation of intricate gear tooth profiles that optimize power transmission and minimize losses. Additionally, the use of high-performance materials, coatings, and lubricants helps reduce friction and wear, improving overall gear motor efficiency.

3. Magnetic Gearing:

Magnetic gearing is an emerging technology that replaces traditional mechanical gears with magnetic fields to transmit torque. It utilizes the interaction of permanent magnets to transfer power, eliminating the need for physical gear meshing. Magnetic gearing offers advantages such as high efficiency, low noise, compactness, and maintenance-free operation. While still being developed and refined, magnetic gearing holds promise for various applications, including gear motors.

4. Integrated Electronics and Controls:

Gear motor designs are incorporating integrated electronics and controls to enhance performance and functionality. Integrated motor drives and controllers simplify system integration, reduce wiring complexity, and allow for advanced control features. These integrated solutions offer precise speed and torque control, intelligent feedback mechanisms, and connectivity options for seamless integration into automation systems and IoT (Internet of Things) platforms.

5. Smart and Condition Monitoring Capabilities:

New gear motor designs incorporate smart features and condition monitoring capabilities to enable predictive maintenance and optimize performance. Integrated sensors and monitoring systems can detect abnormal operating conditions, track performance parameters, and provide real-time feedback for proactive maintenance and troubleshooting. This helps prevent unexpected failures, extend the lifespan of gear motors, and improve overall system reliability.

6. Energy-Efficient Motor Technologies:

Gear motor design is influenced by advancements in energy-efficient motor technologies. Brushless DC (BLDC) motors and synchronous reluctance motors (SynRM) are gaining popularity due to their higher efficiency, better power density, and improved controllability compared to traditional brushed DC and induction motors. These motor technologies, when combined with optimized gear designs, contribute to overall system energy savings and performance improvements.

These are just a few examples of the innovations and emerging technologies in gear motor design. The field is continuously evolving, driven by the need for more efficient, compact, and reliable motion control solutions in various industries. Gear motor manufacturers and researchers are actively exploring new materials, manufacturing techniques, control strategies, and system integration approaches to meet the evolving demands of modern applications.

gear motor

Are there environmental benefits to using gear motors in certain applications?

Yes, there are several environmental benefits associated with the use of gear motors in certain applications. Gear motors offer advantages that can contribute to increased energy efficiency, reduced resource consumption, and lower environmental impact. Here’s a detailed explanation of the environmental benefits of using gear motors:

1. Energy Efficiency:

Gear motors can improve energy efficiency in various ways:

  • Torque Conversion: Gear reduction allows gear motors to deliver higher torque output while operating at lower speeds. This enables the motor to perform tasks that require high torque, such as lifting heavy loads or driving machinery with high inertia, more efficiently. By matching the motor’s power characteristics to the load requirements, gear motors can operate closer to their peak efficiency, minimizing energy waste.
  • Controlled Speed: Gear reduction provides finer control over the motor’s rotational speed. This allows for more precise speed regulation, reducing the likelihood of energy overconsumption and optimizing energy usage.

2. Reduced Resource Consumption:

The use of gear motors can lead to reduced resource consumption and environmental impact:

  • Smaller Motor Size: Gear reduction allows gear motors to deliver higher torque with smaller, more compact motors. This reduction in motor size translates to reduced material and resource requirements during manufacturing. It also enables the use of smaller and lighter equipment, which can contribute to energy savings during operation and transportation.
  • Extended Motor Lifespan: The gear mechanism in gear motors helps reduce the load and stress on the motor itself. By distributing the load more evenly, gear motors can help extend the lifespan of the motor, reducing the need for frequent replacements and the associated resource consumption.

3. Noise Reduction:

Gear motors can contribute to a quieter and more environmentally friendly working environment:

  • Noise Dampening: Gear reduction can help reduce the noise generated by the motor. The gear mechanism acts as a noise dampener, absorbing and dispersing vibrations and reducing overall noise emission. This is particularly beneficial in applications where noise reduction is important, such as residential areas, offices, or noise-sensitive environments.

4. Precision and Control:

Gear motors offer enhanced precision and control, which can lead to environmental benefits:

  • Precise Positioning: Gear motors, especially stepper motors and servo motors, provide precise positioning capabilities. This accuracy allows for more efficient use of resources, minimizing waste and optimizing the performance of machinery or systems.
  • Optimized Control: Gear motors enable precise control over speed, torque, and movement. This control allows for better optimization of processes, reducing energy consumption and minimizing unnecessary wear and tear on equipment.

In summary, using gear motors in certain applications can have significant environmental benefits. Gear motors offer improved energy efficiency, reduced resource consumption, noise reduction, and enhanced precision and control. These advantages contribute to lower energy consumption, reduced environmental impact, and a more sustainable approach to power transmission and control. When selecting motor systems for specific applications, considering the environmental benefits of gear motors can help promote energy efficiency and sustainability.

gear motor

What are the different types of gears used in gear motors, and how do they impact performance?

Various types of gears are used in gear motors, each with its unique characteristics and impact on performance. The choice of gear type depends on the specific requirements of the application, including torque, speed, efficiency, noise level, and space constraints. Here’s a detailed explanation of the different types of gears used in gear motors and their impact on performance:

1. Spur Gears:

Spur gears are the most common type of gears used in gear motors. They have straight teeth that are parallel to the gear’s axis and mesh with another spur gear to transmit power. Spur gears provide high efficiency, reliable operation, and cost-effectiveness. However, they can generate significant noise due to the meshing of teeth, and they may produce axial thrust forces. Spur gears are suitable for applications that require high torque transmission and moderate to high rotational speeds.

2. Helical Gears:

Helical gears have angled teeth that are cut at an angle to the gear’s axis. This helical tooth configuration enables gradual engagement and smoother tooth contact, resulting in reduced noise and vibration compared to spur gears. Helical gears provide higher load-carrying capacity and are suitable for applications that require high torque transmission and moderate to high rotational speeds. They are commonly used in gear motors where low noise operation is desired, such as in automotive applications and industrial machinery.

3. Bevel Gears:

Bevel gears have teeth that are cut on a conical surface. They are used to transmit power between intersecting shafts, usually at right angles. Bevel gears can have straight teeth (straight bevel gears) or curved teeth (spiral bevel gears). These gears provide efficient power transmission and precise motion control in applications where shafts need to change direction. Bevel gears are commonly used in gear motors for applications such as steering systems, machine tools, and printing presses.

4. Worm Gears:

Worm gears consist of a worm (a type of screw) and a mating gear called a worm wheel or worm gear. The worm has a helical thread that meshes with the worm wheel, resulting in a compact and high gear reduction ratio. Worm gears provide high torque transmission, low noise operation, and self-locking properties, which prevent reverse motion. They are commonly used in gear motors for applications that require high gear reduction and locking capabilities, such as in lifting mechanisms, conveyor systems, and machine tools.

5. Planetary Gears:

Planetary gears, also known as epicyclic gears, consist of a central sun gear, multiple planet gears, and an outer ring gear. The planet gears mesh with both the sun gear and the ring gear, creating a compact and efficient gear system. Planetary gears offer high torque transmission, high gear reduction ratios, and excellent load distribution. They are commonly used in gear motors for applications that require high torque and compact size, such as in robotics, automotive transmissions, and industrial machinery.

6. Rack and Pinion:

Rack and pinion gears consist of a linear rack (a straight toothed bar) and a pinion gear (a spur gear with a small diameter). The pinion gear meshes with the rack to convert rotary motion into linear motion or vice versa. Rack and pinion gears provide precise linear motion control and are commonly used in gear motors for applications such as linear actuators, CNC machines, and steering systems.

The choice of gear type in a gear motor depends on factors such as the desired torque, speed, efficiency, noise level, and space constraints. Each type of gear offers specific advantages and impacts the performance of the gear motor differently. By selecting the appropriate gear type, gear motors can be optimized for their intended applications, ensuring efficient and reliable power transmission.

China Best Sales 22mm Pm DC Planetary Transmission Gear Motor   vacuum pump oil	China Best Sales 22mm Pm DC Planetary Transmission Gear Motor   vacuum pump oil
editor by CX 2023-10-20